Course detail
Control of Machines and Drives
FSI-ERS Acad. year: 2027/2028 Winter semester
The course provides theoretical foundations and practical procedures for the control of machines and drives. The content is divided into two interrelated parts. The first part is devoted to the basic concepts of automatic control, the classification of signals and systems, and logic control. Students design combinational and sequential logic circuits and verify their function by simulation in the LOGO! Soft Comfort environment, including work with timers and flip-flops. The second part deals with the mathematical description of continuous-time systems, their characteristics, stability and quality of control, and the design of PID controllers. An introduction to discrete-time control is also included, together with the differences between continuous-time and discrete-time control. Lectures are complemented by computer-based exercises: the first part of the course is practised in simulation tools (LOGO! Soft Comfort, logic.ly), the second part in the MATLAB environment. The course is supported by an e-learning course, which serves as the primary gateway to current information, study materials and contacts for the instructor. The list of courses in which the student is enrolled is displayed to the student in the e-learning environment automatically.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Learning outcomes of the course unit
The student classifies signals and systems as continuous-time and discrete-time, explains the basic concepts of automatic control and describes the difference between continuous-time and discrete-time control. The student explains the principle of logic control, designs and simplifies a combinational and sequential logic circuit, implements it in the LOGO! Soft Comfort environment and demonstrates the correctness of its function by simulation. The student assembles a mathematical model of a continuous-time system, determines its step response, impulse response and frequency response, and assesses the stability of the control loop. The student tunes a PID controller, verifies the control of a continuous-time system in the MATLAB environment and evaluates the quality of the control process. The student independently prepares and defends projects, justifies the chosen procedure and explains the elimination of an identified error in the design.
Entry knowledge
The student knows mathematics at bachelor's level (complex numbers, differential calculus, systems of ordinary differential equations) and the fundamentals of physics and electrical engineering (SI quantities, a simple electrical circuit, power). The student is able to work with computing technology at user level and to describe the procedure for solving a task in logical steps. The fundamentals of work in the LOGO! Soft Comfort and MATLAB environments are part of the course; prior experience with them is not a prerequisite.
Rules for evaluation and completion of the course
The course is completed by a credit and an examination; the credit is a prerequisite for taking the examination.
Credit – the credit is awarded for active participation in the exercises and for the submission and defence of two projects. The defence of a project consists in demonstrating a functional solution and explaining the chosen procedure. Participation in the exercises is compulsory; attendance and the level of knowledge are checked through the solution of practical tasks, with one duly excused absence permitted – the student shall make up for the missed exercise with another group or, alternatively, by working out a substitute assignment on the topic of the missed exercise; the method of substitution shall be determined by the instructor before the beginning of the semester. The logic control project consists in the design of a combinational and sequential logic circuit in the LOGO! Soft Comfort environment, including simulation of its function; the continuous-time control project consists in the design and verification of control in the MATLAB environment. Each project is assessed with 0–15 points; the total obtainable from the exercises is therefore 30 points. No minimum point score for a project is set as a condition for awarding the credit. The points obtained are communicated to the student in the e-learning course no later than before the first examination date.
The examination is carried out in the form of a written test, from which the student may obtain up to 70 points. The overall assessment of the course is the sum of the points from the exercises (max. 30) and the points from the written test (max. 70), i.e. a maximum of 100 points.
The resulting grade for the course is determined by the ECTS grading scale (Article 14 of the Study and Examination Rules of BUT): A 90–100, B 80–89, C 70–79, D 60–69, E 59–50, F 49–0 points.
Aims
The graduate of the course is able to: explain the basic concepts of automatic control, classify signals and systems as continuous-time and discrete-time, and describe the difference between continuous-time and discrete-time control. Explain the principle of logic control and describe the function of combinational and sequential logic circuits, including work with timers and flip-flops. Design and simplify combinational and sequential logic circuits (NAND, NOR) in the LOGO! Soft Comfort environment and verify their function by simulation. Diagnose an error in the design of a logic circuit and propose its elimination. Assemble and describe a mathematical model of a continuous-time system (Laplace transform, block algebra, transfer function) and determine its step response, impulse response and frequency response. Assemble a model of a continuous-time system in the MATLAB environment and assess the stability of the control loop. Tune a PID controller, evaluate the quality of the control process and defend the chosen settings.
Study aids
The study supports are concentrated in the e-learning course of the course, which serves as their primary gateway. The course contains lecture materials, materials for computer-based exercises, assignments of both projects including assessment criteria and submission deadlines, tutorials and model tasks for work in simulation tools for logic control (LOGO! Soft Comfort, logic.ly) and in the MATLAB environment, as well as references to recommended literature indicating the titles available in electronic form.
The study programmes with the given course
Programme B-STR-P: Engineering, Bachelor's
specialization KSB: Quality, Reliability and Safety, compulsory
Programme B-STR-P: Engineering, Bachelor's
specialization SSZ: Machine and Equipment Construction, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
- Basic concepts of control: automation, control, open-loop and closed-loop control; classification of signals and systems; logic functions of one and two variables, contact diagram, truth table, expression in DNF and CNF.
- Boolean algebra and simplification of logic circuits: laws of Boolean algebra and their proofs, algebraic minimisation, Karnaugh map, block diagram.
- Implementation of logic functions with NAND and NOR elements; combinational logic circuits, design examples.
- Sequential logic circuits: classification of logic circuits, RS, JK, D and T flip-flops, asynchronous and synchronous circuits.
- Sequential logic circuits, design examples; introduction to the Siemens LOGO! programmable logic module.
- Programming in the LOGO! Soft Comfort environment: digital functions, function blocks, simulation.
- Siemens LOGO! programmable logic module in practice: worked design and simulation examples.
- Introduction to continuous-time control; Laplace transform, transfer function; impulse and step function and response.
- Frequency transfer function and frequency response; transport delay; block algebra.
- Controllers and stability of the control loop.
- Accuracy and quality of control; synthesis of the control loop.
- Introduction to discrete-time control: differences from continuous-time control, signal discretisation and sampling, principle of the digital controller, examples of use.
- Practical demonstration of temperature control on the TCLab unit: step response of the system, P, PI and PID control; summary of the course and examination requirements.
Computer-assisted exercise
26 hours, compulsory
Syllabus
- Logic control – introduction to simulation tools, truth tables of basic logic functions of one and two variables and their practical verification, design of a simple control task. Organisation of exercises, credit conditions and project assignment.
- Logic control – simplification of logic circuits: conversion of a truth table into an algebraic expression in DNF and CNF, algebraic minimisation according to the rules of Boolean algebra.
- Logic control – minimisation using the Karnaugh map, simulation verification of the minimised forms.
- Logic control – combinational logic circuits, worked design examples.
- Logic control – sequential logic circuits, worked design examples, modelling and verification of the function of RS and RST flip-flops.
- Independent work on the logic control project in the computer laboratory.
- Presentation and defence of the logic control project.
- Continuous-time control – transfer function and characteristics of a system: conversion of a differential equation into a transfer function, impulse and step response of mechanical and electrical systems in the MATLAB environment.
- Continuous-time control – frequency transfer function and frequency responses, block algebra, determination of the natural frequency of a system, model of a DC motor.
- Continuous-time control – controllers and stability of the control loop: step responses of controller types, Hurwitz stability criterion, assessment of stability from the step response.
- Continuous-time control – controller tuning by the Ziegler-Nichols method for P, PI, PD and PID controllers, computationally and experimentally in the MATLAB environment; assignment of the continuous-time control project.
- Independent work on the continuous-time control project in the computer laboratory.
- Submission of the continuous-time control project, its defence, checking of the results of the exercises and awarding of the credit.