Course detail

Environmental Technology

FSI-IET Acad. year: 2027/2028 Summer semester

The course focuses on the environmental impacts of energy processes, in particular the formation, dispersion and control of air pollutant emissions.

 

Students will learn about the main pollutants produced during fuel combustion, their properties and their impact on the environment, the issue of greenhouse gases, and the principles of pollutant dispersion in the atmosphere. The course centres on technologies for the separation of solid pollutants, flue gas desulphurisation, and the reduction of emissions of nitrogen oxides, organic compounds and heavy metals.

 

The course also covers the basic principles of wastewater treatment and technologies for the capture and utilisation of CO₂. In practical sessions, students carry out mass balance calculations, conversions of emission concentrations, calculations of pollutant dispersion, and basic design calculations for selected flue gas treatment technologies.

 

The course provides knowledge and skills applicable to the technical assessment of environmental parameters of energy-generating installations and to the design and operation of technologies aimed at mitigating their negative impacts.

Language of instruction

Czech

Number of ECTS credits

5

Department

Learning outcomes of the course unit

Upon successful completion of the module, the student will be able to:
1. Describe the main pollutants generated during energy processes, the mechanisms by which they are produced, and their basic environmental impacts.
2. Explain the influence of meteorological conditions on the dispersion of pollutants in the atmosphere and apply basic calculation methods to assess their concentrations.
3. Carry out basic material and energy balances and conversions of emission concentrations when assessing energy installations.
4. Explain the principles of mechanical separation, filtration and electrostatic precipitation of solid pollutants.
5. Carry out basic design calculations for a cyclone separator and calculate the separation efficiency of an electrostatic precipitator.
6. Compile basic balance calculations for selected flue gas desulphurisation technologies, including an assessment of reagent consumption and the formation of reaction products.
7. Compare basic methods for reducing emissions of nitrogen oxides, organic compounds and heavy metals in terms of their operating principles and suitability for use.
8. Describe basic technologies for wastewater treatment and for the capture and utilisation of CO₂.
9. Understands the basic requirements of air protection legislation and takes emission limits and operational requirements into account when carrying out technical assessments.

Entry knowledge

Students are expected to have a knowledge of thermomechanics, energy and mass balances, the basic principles of fuel combustion and the operation of power generation plant.

Students should be proficient in basic technical calculations and in working with physical quantities. Basic knowledge of atmospheric physics and the processes of absorption, adsorption and separation is covered as part of the course.

Rules for evaluation and completion of the course

The course concludes with a credit assessment and an examination.
Conditions for obtaining credit
Credit is awarded on condition of active participation in seminars, the successful completion and presentation of the results of the term project, passing the final credit assessment test, and participation in a field trip to a waste-to-energy facility.
The credit test assesses students’ mastery of the calculation methods and specialist knowledge covered in the practical sessions. To pass, students must achieve 50 per cent of the maximum number of marks.
In the event of an excused absence from the field trip or if the trip cannot take place, students will be assigned an appropriate alternative specialist activity in consultation with the lecturer.
Examination assessment rules
A prerequisite for sitting the examination is having previously obtained a credit.
The examination is conducted in written form, with the option of an oral review. The written part comprises theoretical questions on the material covered in the lectures. Individual questions are marked on a points basis, and the grade is determined by the total number of points obtained according to the standard ECTS grading scale (A–F) .
If the result of the written part is close to the boundary between two grades (±2 percentage points), the examiner may offer the student an oral review. The aim of this is to clarify the student’s level of knowledge. On the basis of the oral review, the final grade may be improved or reduced by no more than one grade, and only between the two adjacent grades at the boundary of which the result of the written part lies.

Attendance at classes
Attendance at seminars is compulsory and is monitored by the seminar tutor. Students must make up for any excused absence by arrangement with the seminar tutor.
Attendance at lectures is not compulsory.

Aims

The aim of the course is to deepen students’ understanding of the environmental context of energy processes and to develop their ability to apply technical calculations when assessing the generation, dispersion and control of pollutant emissions.

Emphasis is placed on the principles and operational characteristics of flue gas treatment technologies, the preparation of material balances, separation calculations and the basic technical assessment of measures to reduce emissions.

The study programmes with the given course

Programme N-SUE-P: Computational Simulations for Sustainable Energy, Master's, compulsory-optional

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization ENI: Power Engineering, compulsory-optional

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization FLI: Fluid Engineering, compulsory-optional

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization TEP: Environmental Engineering, compulsory-optional

Type of course unit

 

Lecture

39 hours, optionally

Syllabus

1. Components of the environment, the atmosphere, the composition of the Earth’s atmosphere, and its physical properties.
2. Selected topics in chemical engineering – condensation, absorption, adsorption, sedimentation.
3. Air protection – legislation, emission limits and requirements for the operation of energy sources.
4. Formation and properties of emissions: CO, CO₂, the greenhouse effect, NOx, SOx, HCl, HF, ozone, secondary pollution and ozone layer depletion.
5. Formation and properties of emissions: PCDD, PCDF, PAH, soot, particulate matter; handling and storage of slag and fly ash
6. Dispersion of pollutants in the atmosphere – meteorological conditions, atmospheric stability and basic dispersion models.
7. Particulate matter control: mechanical separators, particle settling in a gravitational field, cyclones, design, operation,
8. Particulate matter control: filtration, fabric filters (hose and bag types); electrostatic precipitators, principle, V-A characteristics, reverse corona, design, operation.
9. SOx control: flue gas desulphurisation, chemical reactions, lime-limestone methods.
10. Reduction of NOₓ emissions – primary measures, SNCR, SCR and other methods.
11. Removal of organic compounds and heavy metals,
12. Causes and consequences of water pollution, basic treatment methods.
13. CO₂ capture and utilisation – basic technological principles and application possibilities.

Exercise

26 hours, compulsory

Syllabus

1. Basic chemical and material calculations, conversion of emission concentrations and their expression in various units.
2. Separation of solid pollutants – the principle of electrostatic separation, basic design calculations and the efficiency of separators.
3. Separation of solid pollutants – cyclone separators, basic design calculations and operating parameters.
4. Emissions of nitrogen oxides (NOₓ) – basic emission calculations and assessment of options for their reduction.
5. Sulphur oxide (SOₓ) emissions – emission calculations and basic material balances for desulphurisation technologies.
6. Carbon dioxide (CO₂) capture – basic principles and material balance calculations for selected capture technologies.
7. Flue gas plume – basic calculations of pollutant dispersion in the atmosphere and the influence of meteorological conditions.
8. Field trip – familiarisation with real-world power station operations, with an emphasis on the removal of impurities from flue gases.
9. Independent project – assignment of a technical task, independent analysis of input data and selection of a solution approach.
10. Independent project – independent performance of calculations, evaluation of results and preparation of a presentation.
11. Presentation of independent projects – presentation of solutions, technical discussion and evaluation of results.
12. Presentation of independent projects – continuation of presentations, technical discussion and evaluation of the chosen approaches.
13. Credit – final assessment of fulfilment of the requirements set for the award of credit.