Course detail

Thermal processes and equipment

FSI-IKT Acad. year: 2027/2028 Winter semester

The course focuses on the principles, structural layout, basic design calculations and operational characteristics of two fundamental types of power generation equipment – heat exchangers and boilers.
The first part covers the classification of heat exchangers, their structural design, the fundamentals of thermal design and operational issues, particularly fouling and the associated deterioration in heat transfer. In the calculation exercises, students will carry out a basic design of a tube and plate heat exchanger.
The second part focuses on the properties of solid, liquid and gaseous fuels, the stoichiometry of combustion, energy balances, efficiency and losses in boilers. Students will become familiar with the design and operation of grate, pulverised fuel, fluidised bed and other types of boilers, their basic components and selected technologies for the thermal treatment of biomass and waste.
The course combines theoretical principles with computational exercises and the operational assessment of energy installations. The knowledge gained is applicable to the technical design, evaluation and operation of thermal energy systems.

Language of instruction

Czech

Number of ECTS credits

5

Department

Learning outcomes of the course unit

Upon successful completion of the module, the student will be able to:
1. Classify the basic types of heat exchangers and boilers, and explain their design, operating principles, advantages and operational limitations.
2. Draw up a basic heat balance for a heat exchanger and carry out a preliminary thermal design of a tube and plate heat exchanger.
3. Identify selected operational problems with heat exchangers and explain their impact on heat transfer and plant operation.
4. Describe the properties of the main types of fuel and explain their influence on the choice of combustion technology and boiler operation.
5. Carry out basic stoichiometric calculations for the combustion of solid and gaseous fuels.
6. Compile a basic energy balance for a boiler, calculate its efficiency and evaluate the main heat losses.
7. Calculate selected basic fluidised bed parameters and explain the principles of fluidised bed combustion.
8. Compare basic types of boilers in terms of fuel, design, operational characteristics and suitability for use.

Entry knowledge

Students are expected to have a knowledge of thermomechanics, hydromechanics and the fundamentals of heat transfer at undergraduate level. Students should be able to draw up simple energy and mass balances, apply basic equations for heat transfer and fluid flow, and carry out standard technical calculations.

Rules for evaluation and completion of the course

Requirements for Obtaining Coursework Credit

Coursework credit is awarded upon successful completion of two written tests and an individual design assignment.

The first test assesses the student's ability to perform basic heat exchanger calculations, particularly the thermal design of shell-and-tube and plate heat exchangers and the calculation of pressure losses.

The second test assesses the student's ability to perform combustion stoichiometry calculations and boiler heat balance calculations.

To pass each test, the student must obtain more than 50% of the maximum available points. Both tests must be passed independently; their results cannot be combined to compensate for an unsuccessful result. One retake is permitted for failed test.

The individual design assignment builds on the calculations covered in practical classes. Based on a previously calculated heat balance, the student proposes a structural design of a heat exchanger and prepares a calculation report and a schematic drawing of the proposed equipment. The deadline for the initial submission is the end of the 13th week of the semester.

The assignment is assessed on a pass/fail basis. If the assignment is assessed as failed, the student is allowed one revision and resubmission.

Coursework credit is awarded only if all three requirements are met:

  • successful completion of the first written test,

  • successful completion of the second written test,

  • successful completion of the individual design assignment.

Examination and Assessment Rules

Students are eligible to sit the examination only after obtaining coursework credit.

The examination consists of a written examination with the possibility of an oral grade adjustment. The written examination contains theoretical questions covering the topics taught in lectures. Each question is assigned a specific number of points, and the grade is determined by the total number of points obtained, according to the standard ECTS grading scale (A–F).

If the result of the written examination falls close to the boundary between two grades (within ±2 percentage points), the examiner may offer the student an oral assessment to clarify their level of knowledge. Based on this assessment, the final grade may be improved or lowered by no more than one grade, and only between the two adjacent grades corresponding to the boundary near which the written examination result falls.

Participation in the oral assessment is voluntary. If the student declines, the grade obtained in the written examination remains valid.

The final examination grade is awarded according to the ECTS grading scale (A–F).

Attendance Requirements

Attendance at practical classes is compulsory and is monitored by the class instructor. Excused absences must be made up as agreed with the instructor.

Attendance at lectures is not compulsory.

Aims

The aim of the course is to deepen and apply knowledge of thermomechanics, hydromechanics and heat transfer when solving basic design and operational problems relating to heat exchangers and boilers.
Students will gain an overview of the design types of heat exchangers and boilers, their function, advantages and limitations. They will learn to carry out basic thermal calculations for heat exchangers, stoichiometric combustion calculations, energy balances, and calculations of boiler efficiency and losses. They will be able to assess the influence of fuel properties and operating conditions on the performance of selected energy equipment.

The study programmes with the given course

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization ENI: Power Engineering, compulsory

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization FLI: Fluid Engineering, compulsory

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization TEP: Environmental Engineering, compulsory

Type of course unit

 

Lecture

39 hours, optionally

Syllabus


  1. Introduction, a review of the fundamentals of heat transfer; significance for the thermal design and operation of heat exchangers

  2. Classification of heat exchangers and their categorisation, design specifications

  3. Basic methods of thermal design for heat exchangers, selection of design solutions.

  4. Operational faults in heat exchangers, their impact on the design and construction of heat exchangers.

  5. Classification of boilers; fundamental considerations in the design of combustion equipment; solid fuels and their properties

  6. Liquid and gaseous fuels and their properties

  7. Combustion thermodynamics; boiler energy balances; boiler thermal efficiency; losses.

  8. Furnaces; furnaces in grate boilers.

  9. Furnaces of pulverised and fluidised-bed boilers.

  10. Boilers for the combustion of liquid and gaseous fuels, burners.

  11. Steam section of the boiler, combustion air preheating.

  12. Thermal plants for the energy recovery from biomass and waste.

  13. Fuel gasification, promising combustion technologies and the oxy-fuel principle.

Computer-assisted exercise

26 hours, compulsory

Syllabus


  1. Revision of thermomechanics – heat transfer and energy balances.

  2. Basic thermal design of a tubular heat exchanger.

  3. Basic thermal design of a plate heat exchanger.

  4. Calculation of pressure losses in heat exchangers.

  5. First assessment test – heat exchanger calculations.

  6. Stoichiometric calculations for fuel combustion.

  7. Calculation of boiler efficiency and heat losses.

  8. Introduction to boiler energy balances.

  9. Calculation of the boiler heat balance.

  10. Second assessment test – stoichiometry of combustion and boiler heat balance.

  11. Independent design task – design of a heat exchanger based on the heat balance analysed in the practical sessions.

  12. Independent design task – preparation of a calculation report and a schematic drawing of the heat exchanger.

  13. Independent design task – completion and submission of the calculation report and schematic drawing.