Course detail
Process and Power Engineering and Legislation
FSI-KEL Acad. year: 2027/2028 Winter semester
A typical feature of process engineering is its close link to legislation. The reason is that the operation of industrial plants is generally considered hazardous, with the potential to endanger the health and lives of the population or to cause an environmental disaster. For this reason, the construction and operation of industrial plants are also subject to a high degree of regulation by legislation. The design, construction and operation of industrial equipment are subject to permits, emission limits and other technical operating conditions. The operator of the equipment is liable for impacts on human health and the environment. The course gives an overview of the regulation of industrial installations in the EU and the Czech Republic: how legislation is structured, who issues it and how it is reflected in engineering practice.
The course focuses on the essential EU and Czech legislation related to the design and operation of process equipment, permitting processes and the construction of industrial plants, the prevention of major accidents, the environmental impact of operation and the efficient use of natural resources and energy. The course also covers technical standards, legal liability in engineering practice, intellectual property protection and corporate sustainability reporting (ESG).
In the exercises, students solve model examples of typical process installations. In the semester project, students work in groups to apply the topics covered to a selected real industrial installation.
Language of instruction
Czech
Number of ECTS credits
4
Supervisor
Department
Entry knowledge
Before starting the course, the student should be able to:
- set up a simple mass and energy balance,
- describe in principle how an industrial installation works (inputs, outputs, main equipment) and read a simple process flow diagram,
- explain basic concepts of chemistry and the environment (chemical substance and mixture, concentration, emission, air and water pollution),
- perform simple calculations with units and concentration conversions and process measured data in a spreadsheet,
- search for and critically evaluate technical information and cite sources correctly,
- work in a team and present the results of their work.
This knowledge corresponds to a bachelor’s degree in engineering or a related field.
Rules for evaluation and completion of the course
Course completion
The course is completed by a course-unit credit and an examination. Only students who have been granted the course-unit credit may register for the examination.
Attendance
Attendance at lectures is voluntary. Attendance at exercises is compulsory and is checked by an attendance sheet. A student may miss at most 2 exercises without compensation. In justified cases (e.g. long-term illness confirmed by a doctor), missed classes may be compensated by an individual project (solution of a practical case study). The teacher of the exercise decides on the compensation.
Requirements for the course-unit credit
The course-unit credit is granted if all requirements are met:
- fulfilment of compulsory attendance at exercises,
- submission of the semester project and its presentation,
- obtaining at least 15 out of 30 points for the semester project and the presentation.
Semester project (0–20 points)
The semester project is group work. Students work on assigned tasks that follow the topics covered in the course, applied to a selected real industrial installation. The output is a written report with references to specific legal provisions and the sources used. In addition to the correctness and completeness of the solution, the formal quality of the work is assessed. A project submitted after the deadline can obtain at most half of the points. In the case of a duly excused obstacle to submit, the teacher may extend the deadline. A project that does not reach the minimum for the course-unit credit may be revised once by a deadline set by the teacher.
Presentation (0–10 points)
Each group presents its project in the last exercise. Form, content and the ability to respond to questions and comments are assessed. In the case of excused absence, the teacher sets an alternative date for the presentation. As a rule, all members of the group receive the same points for the project and the presentation. The teacher may adjust the points of individual members according to their contribution to the work and their answers during the presentation.
Examination (0–70 points)
The examination has a written and an oral part. The written part is a test with 20 questions in the e-learning system (0–20 points). The oral part tests the understanding of the legislative system, knowledge of the basic principles, rules and mechanisms, and the ability to apply this knowledge in the context of specific operating situations (0–50 points). Passing the examination requires at least 10 points in the written part and at least 25 points in the oral part.
Final grading
The final grade is based on the sum of points for the semester project, the presentation and the examination (maximum 100 points). The grade is determined according to the ECTS scale: A 90–100 points, B 80–89, C 70–79, D 60–69, E 50–59, F less than 50 points. A student who does not reach the minimum in the written or the oral part of the examination is graded F regardless of the total number of points.
Aims
The aim of the course is to enable students to apply in engineering practice the legal and technical requirements related to the design, construction and operation of process and power equipment.
A student who successfully completes the course is able to:
- find EU and Czech legislation and technical standards relevant to a given case, verify the wording in force for the case at hand and explain the difference between a legal act and a technical standard,
- identify the legal obligations applicable to a specific industrial installation and equipment, apply the requirements of legislation to them and derive specific risks for the operation,
- assess given operating parameters of an installation (air emissions, wastewater pollution, waste generation, energy consumption) against the requirements of applicable legislation,
- classify hazardous chemical substances, identify the main hazards of a model installation and develop a major accident scenario,
- describe the permitting process for the construction and operation of a process plant and the obligations of the manufacturer when placing products on the market,
- explain the basic principles of legal liability in engineering practice, intellectual property protection and corporate sustainability reporting (ESG).
Study aids
Study materials are available in the e-learning course of KEL (BUT Moodle) for the given academic year:
- lecture presentations,
- materials for the exercises,
- the semester project assignment and instructions for its preparation and presentation,
- links to other relevant sources and materials.
Consolidated versions of Czech legislation are available in e-Sbírka (e-sbirka.gov.cz), EU legislation in EUR-Lex (eur-lex.europa.eu). The written part of the examination also takes place in the e-learning course.
The study programmes with the given course
Programme N-PRI-P: Process Engineering, Master's, compulsory
Programme NMSP-RRTES: Risk Management of Technical and Economic Systems, Master's
specialization RRTS: Risk Management of Technical Systems, compulsory-optional
Type of course unit
Lecture
26 hours, optionally
Syllabus
The thematic content, the total scope of teaching and the learning outcomes remain unchanged; however, the sequence of the topics may be adjusted based on actual needs. The current schedule is published in the e-learning course (Moodle).
- Legal liability in engineering practice.
- Prevention of major accidents caused by hazardous chemical substances.
- Identification and assessment of major accident risks.
- Environmental protection I. Air and climate protection.
- Environmental protection II. Water protection.
- Legislation for the construction and operation of process plants. Permitting process: building permit, environmental impact assessment (EIA), integrated permit.
- Future and trends in the energy sector in the context of legislation, energy management.
- The Waste Act and its implementing decrees.
- Technical standards.
- Placing products on the market.
- Intellectual property protection.
- Corporate sustainability reporting (ESG).
- Solution of model examples of typical industrial installations.
Exercise
13 hours, compulsory
Syllabus
The course exercises will cover the following topics:
The exercises follow the lectures. Students solve model problems and progressively work on partial tasks of the semester project.
- Legal liability.
- Classification of hazardous chemical substances.
- Development of major accident scenarios.
- Measurement and evaluation of emissions and wastewater quality I.
- Measurement and evaluation of emissions and wastewater quality II.
- Permitting practice with public authorities.
- The role of an energy specialist in industry.
- The Waste Act and its implementing decrees.
- Measurement and evaluation of emissions and wastewater quality III.
- Placing products on the market. Determination of the basic obligations of the manufacturer for a model product.
- Intellectual property protection.
- Corporate sustainability reporting (ESG).
- Presentation and assessment of semester projects.