Course detail

Construction of Process Equipment II

FSI-KKR Acad. year: 2027/2028 Summer semester

The course focuses on the mechanical design and assessment of process equipment, particularly pressure vessels and heat exchangers. It links mechanics and strength of materials with legislative requirements and technical standards. Emphasis is placed on Directive 2014/68/EU (PED), the EN 13445 series and selected ASME BPVC approaches. Topics include design by formula, principles of design by analysis, material properties, flange joint and supporting steel structure design. Practical examples are included.

In the exercises, students work in teams on one semester project involving an assigned item of pressure equipment. They implement their own code-based calculations in a suitable computational tool, verify them using specialised software and explain discrepancies. Deliverables include a technical report, calculation files, an assembly drawing and a defence of the proposed solution.

Language of instruction

Czech

Number of ECTS credits

6

Learning outcomes of the course unit

On successful completion of the course, students will be able to:

Explain the relationship between PED requirements, technical standards and the mechanical design of pressure equipment.

Determine design conditions and relevant loads for assigned equipment and obtain the material properties required for calculations.

Distinguish between design by formula and design by analysis, explain their assumptions and describe the basic principles of stress categorisation.

Perform and document code-based calculations for selected parts of assigned pressure equipment in accordance with EN 13445 and verify the applicability of the equations.

Implement code equations in a suitable computational tool and verify their correct application.

Perform verification calculations using specialised software, compare the two approaches and explain discrepancies.

Explain the fundamental design principles of flange joints and steel structures associated with process equipment.

Prepare a technical report and an assembly drawing and defend the design assumptions, calculation procedure and proposed solution.

Entry knowledge

Basic knowledge of strength of materials, mechanics and materials science. Students can determine stresses and strains under basic loading conditions, use material properties and read engineering drawings. Basic skills in CAD and a computational tool for evaluating mathematical expressions are expected.

Rules for evaluation and completion of the course

The course is completed by obtaining course-unit credit and passing an examination. Course-unit credit requires active participation in the exercises, continuous work on the semester project, submission of the required deliverables and a successful project defence.

The project includes students’ own code-based mechanical calculations, verification using specialised software, comparison and interpretation of results, a technical report and an assembly drawing. Assessment considers the correctness of input data and calculation procedures, compliance with the applicability conditions of the equations, interpretation of results and consistency between calculations and drawings. Each team member must demonstrate their contribution and understanding during the defence.

The examination comprises written and oral parts and assesses theoretical knowledge and its application to design and calculation problems covered by the syllabus. The examination grade reflects the technical accuracy and completeness of answers, justification of methods, interpretation of results and independent problem-solving. The ECTS grading scale specified in the BUT Study and Examination Rules is used.

Lectures are optional. Attendance at exercises is compulsory and recorded by the teacher. Absences are excused in accordance with the BUT Study and Examination Rules. Students complete the missed project work and demonstrate their understanding during a progress check or consultation. Make-up arrangements for longer excused absences respect course completion deadlines.

Aims

The aim of the course is to familiarise students with the legislative and regulatory requirements for the mechanical design of process equipment, particularly pressure vessels and heat exchangers, with an emphasis on Directive 2014/68/EU (PED), EN 13445 standards, and selected approaches of the ASME Boiler and Pressure Vessel Code (ASME BPVC).

The course develops students' ability to independently design and assess selected components of pressure equipment using theoretical knowledge of mechanics, strength of materials, shell theory, and the fundamentals of steel structure design.

Students gain an overview of standardised calculation procedures and software tools used in the design of pressure vessels, piping systems, and related structures. They are introduced to specialised software packages, such as Sant'Ambrogio and Octave Aspect Pressure Vessel, which are used for verification calculations of pressure equipment.

Emphasis is placed on independently solving engineering design and calculation problems, verifying and critically evaluating results, preparing technical documentation, and developing the ability to technically justify and defend proposed design solutions.

Study aids

Slides, the project assignment and computational tool guidance are available in the course e-learning environment. Standards are accessible through BUT licensed resources. The assignment specifies the parts and editions to be used.

The study programmes with the given course

Programme N-PRI-P: Process Engineering, Master's, compulsory

Type of course unit

 

Lecture

26 hours, optionally

Syllabus


  1. Process equipment, design configurations, operating conditions and basic failure mechanisms.

  2. Legislative and standards framework for pressure equipment design. PED terminology, classification and principles of conformity assessment.

  3. Safe design requirements. Design conditions, loads and load combinations, safety factors.

  4. Pressure equipment materials, properties at design conditions and allowable stress.

  5. Design by formula. Structure of EN 13445 and calculation principles for selected pressure vessel components.

  6. Design by analysis. Principles of finite element analysis, model assumptions and stress categorisation.

  7. Selected ASME BPVC approaches and their comparison with the European approach to pressure equipment design.

  8. Design principles for pressure vessels and heat exchangers; effects of manufacture and operation on design.

  9. Flange joints, gaskets and principles of mechanical assessment.

  10. Industrial piping, loads, thermal expansion, supports and basic principles of mechanical assessment.

  11. Steel structures associated with process equipment. Eurocodes, limit states and load combinations.

  12. Inspection, non-destructive testing and operational issues of pressure equipment in relation to design.

  13. Industrial case study: justification of design decisions and links between design, manufacture, inspection and operation.

Computer-assisted exercise

39 hours, compulsory

Syllabus


  1. Analysis of the assignment, allocation of team responsibilities, use of standards and determination of design conditions and material properties.

  2. Calculation of allowable stress and cylindrical shell thickness using the selected computational tool.

  3. Dished head calculation, application of an iterative method and verification of the calculation assumptions.

  4. Calculation of openings and nozzles in cylindrical shells and dished heads as specified in the assignment.

  5. Calculation of additional assigned components, such as a heat exchanger tubesheet.

  6. Design and assessment of the equipment’s flange joints.

  7. Completion of flange joint and relevant closure calculations; verification of the completeness of the code-based calculations.

  8. Creation of the equipment model in specialised software and verification of input data.

  9. Evaluation of software results, comparison with students’ own calculations and explanation of discrepancies.

  10. Preparation of the assembly drawing and verification of consistency with the calculated design.

  11. Preparation of the technical report, documenting design assumptions, calculation procedures and results.

  12. Completion of the project; checking consistency between the report, calculation files and drawing; preparation for the defence.

  13. Project submission and defence; verification of individual contributions and understanding.

Self-study

65 hours,

Syllabus

Individual preparation for an ending of the course

26 hours,

Syllabus