Course detail
Mechanical Processes
FSI-KMP Acad. year: 2027/2028 Summer semester
Mechanical Processes deal with the processing and handling of solid materials in particulate form, whose behavior differs significantly from that of liquids and gases. Bulk solids represent an important class of raw materials, intermediates, and products in the chemical, food, pharmaceutical, construction, ceramic, and energy industries, and their efficient handling is an essential part of many technological processes.
The course introduces students to the geometric and physical properties of particulate materials, the principles governing their mechanical behavior, stress distribution, and bulk solids flow. Particular attention is devoted to the fundamental unit operations of mechanical processing, including particle size reduction (crushing and grinding), classification, agglomeration, mixing, dosing, conveying, and storage of bulk solids. For each operation, the underlying physical principles, the types of equipment used, and methods for determining key design and operating parameters are discussed.
During the tutorial sessions, students solve calculation problems related to the analysis and design of particulate processing operations, ranging from particle size distribution analysis to the design of storage vessels and silos. The course also includes laboratory exercises, where students gain hands-on experience with selected mechanical operations, perform measurements of particulate material properties, and analyze and evaluate experimental data.
The knowledge and skills acquired in this course provide a foundation for the design, operation, and optimization of equipment used for the processing, transport, and storage of bulk solids and are applicable across a wide range of industrial sectors.
.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Department
Learning outcomes of the course unit
The student understands the properties of particulate materials and their influence on the behaviour of mechanical processes. They are able to characterize bulk solids using geometric particle parameters such as particle size, shape, sphericity, specific surface area and porosity, and to interpret particle size distributions using both differential and cumulative distribution curves. The student understands stress states in bulk solids, mechanisms of particle-particle interactions, and the conditions leading to particle failure within particulate materials. Furthermore, they can explain the causes of operational problems encountered during the storage and handling of bulk solids, particularly arching and non-uniform flow in storage bins and hoppers. The student is familiar with the principles, design features and application areas of equipment used for crushing, grinding, classification, agglomeration, mixing, dosing, conveying and storage of bulk solids, and is able to assess the suitability of such equipment with respect to material properties and the required product specifications.
Entry knowledge
Student entering the course is expected to possess fundamental knowledge of mathematics, physics and engineering sciences relevant to process engineering. In particular, the student should be able to perform basic technical calculations, work with physical quantities and units, apply fundamental concepts of solid and fluid mechanics, and process and interpret experimental data. Furthermore, the student is assumed to be familiar with the principles of material balances and basic engineering problem solving. These competencies are typically acquired through undergraduate courses in mathematics, mechanics and introductory process engineering.
Rules for evaluation and completion of the course
Requirements for Course Credit
Awarding of course credit is conditional upon regular attendance at classes, submission of laboratory reports, and successful completion of the credit test.
Attendance at classes is mandatory and is monitored using attendance sheets. A maximum of two absences, whether excused or unexcused, is permitted. Any missed class must be compensated by the independent completion of an assigned problem, which the student must submit to the instructor for review.
During the credit test, students may use all available study materials (textbooks, notes, tables, etc.) as well as a calculator. The purpose of the test is to assess students' understanding of the subject matter and their ability to solve engineering problems independently.
To pass the credit test, students must obtain at least 50% of the total available points. The evaluation also takes into account the solution procedure and methodology, not only the final result.
Attendance at lectures is recommended.
Examination
Obtaining course credit is a prerequisite for admission to the examination.
The examination is conducted orally. The student draws an examination question and prepares a written solution during the allotted preparation time. This is followed by the oral part of the examination, during which both the credit test and the written preparation are evaluated, followed by a professional discussion of the selected topic.
Aims
Upon completing the course, students will acquire knowledge of the properties of particulate materials, their mechanical behaviour, and the principles of operations used for their processing, conveying and storage. They will understand the relationships between material properties, process performance and the design of equipment for crushing, grinding, classification, agglomeration, mixing, dosing, conveying and storage of bulk solids. In addition, they will develop the ability to solve fundamental engineering problems, including particle size distribution analysis, the design of selected process equipment, and the evaluation of flow behaviour and storage of particulate materials.
Study aids
Learning materials consist primarily of lecture presentations, a collection of worked examples, project assignments, and recommended technical literature focused on mechanical operations and particulate solids technology.
The study programmes with the given course
Programme N-PRI-P: Process Engineering, Master's, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
1. Introduction to Process Engineering. Position and role of mechanical processes in process engineering.
2. Geometrical characteristics of particles in particulate materials.
3. Stress state in particulate materials and interparticle bonding mechanisms.
4. Particle size reduction: crushing, grinding, and cutting.
5. Separation of particulate materials: classification and sorting processes.
6. Agglomeration, agglomerate strength, and tower agglomeration.
7. Conveying of bulk solids.
8. Hydraulic and pneumatic conveying, fluidized troughs.
9. Mixing of particulate materials, degree of mixing, sampling methods, and mixing equipment.
10. Dosing of bulk solids. Rotary kilns.
11. Storage, extensive and intensive (silos).
12. Theory of structural design calculations for deep storage bins and silos.
13. Pressure distribution and flow behavior of bulk solids, arching phenomena in deep silos.
Exercise
13 hours, compulsory
Syllabus
- Fundamentals of calculations in process engineering.
- Particle shape factor, sphericity, and specific surface area.
- Laboratory exercise: Characterization of particulate materials, void fraction, and porous media.
- Laboratory exercise: Concentration calculations and conversions, bulk density.
- Particle systems, cumulative and distribution curves, sieving.
- Laboratory exercise: Evaluation and applications of sieve analysis.
- Crushers and crushing.
- Laboratory exercise: Mills and grinding.
- Mixers, mixing, and degree of mixing.
- Laboratory exercise: Conveying and conveying systems.
- Design calculations for deep silos.
- Flow of bulk solids.