Course detail

Measurement and Regulation in Power Engineering

FSI-LMR Acad. year: 2027/2028 Summer semester

This course focuses on the measurement, control, and automatic regulation of energy equipment and technological units. First, it examines basic control loops and the characteristics of their key components—feedback sensors for non-electrical quantities, actuators, electrical control elements, and industrial control systems. This is followed by control and regulation in the power grid (primary, secondary, and tertiary power and frequency control, control capabilities of conventional and renewable energy sources, and grid collapse prevention), as well as the control of steam, nuclear, and combined-cycle power plants, district heating boilers, waste-to-energy plants, and auxiliary equipment (pumps, fans, compressors). Theoretical instruction is supplemented by computer and laboratory exercises focused on the control design of a feedwater station and hydrogen production from renewable energy sources (RES), as well as the experimental verification of sensor and control loop parameters.

The course is taught in blocks of 3 teaching hours per week (39 hours in total per semester): lectures are held in weeks 1 to 8 of the semester (8 × 3 h), followed by exercises in weeks 9 to 13 (5 × 3 h).

Language of instruction

Czech

Number of ECTS credits

5

Department

Entry knowledge

Knowledge of the design and operating characteristics of boilers, steam and gas turbines, compressors, and pumps, as well as the fundamentals of engineering thermodynamics, fluid mechanics, and heat transfer. A basic overview of general electrical engineering and working with computational software.

Rules for evaluation and completion of the course

Requirements for awarding course credit and attendance control:

Lectures are optional. Seminars are mandatory, and attendance is checked by the instructor; any excused absence must be made up by the student in agreement with the instructor.

To be awarded course credit, students must actively participate in seminars, as well as complete and defend a credit project according to the assignment.

Examination and final grading rules: The exam is written.

The final course grade is based on the overall evaluation of the written exam according to the ECTS grading scale pursuant to Article 14 of the BUT Study and Examination Regulations.

  • A (excellent): 100–90%
  • B (very good): 89–80%
  • C (good): 79–70%
  • D (satisfactory): 69–60%
  • E (sufficient): 59–50%
  • F (failed): 49–0%

Aims

Upon completing the course, the student will be able to:

Subject-specific knowledge:

Describe the structure of control loops, operating principles, and key metrological and dynamic parameters of feedback sensors, actuators (including their electrical control elements), and control systems in power engineering.

Explain the methods of controlling the power output and operating parameters of steam, nuclear, and combined-cycle power plants, district heating boilers, waste incineration boilers, and individual technological units.

Characterize the principles of frequency, voltage, and active power control in the electrical power system (primary, secondary, and tertiary control), the control capabilities of various types of power sources, and the causes and prevention of grid collapse.

Subject-specific skills:

Design an instrumentation and control (I&C) concept for selected energy technologies (e.g., a boiler feedwater station or a system for hydrogen production from renewable energy sources) and specify technical documentation for the control system.

Compare the control demands and energy consumption of different methods of controlling power equipment (e.g., variable frequency drive pump control vs. discharge throttling) and evaluate their impact on operating economics.

Verify the metrological and dynamic properties of temperature, pressure, and flow sensors through laboratory measurements and tune controller parameters to control a process variable.

Study aids

Study supports are located on e-learning.

The study programmes with the given course

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization ENI: Power Engineering, compulsory

Type of course unit

 

Lecture

26 hours, optionally

Syllabus

Week 1 (3 hrs): Basic control loop, key components of a control loop for energy systems. Electrical control elements and their application in control (continuous, On/Off, and PWM).


Week 2 (3 hrs): Feedback elements: temperature, pressure, flow, and level sensors, sensors for fuel dosing control, safety elements. Key characteristics of feedback elements (resolution, accuracy, and response), areas of application, and data acquisition.


Week 3 (3 hrs): Actuators: electric heat sources, electrically operated valves, control of pumps, belt conveyors, fuel feeders, and safety elements. Key characteristics of actuators (response, controllability, and achievable control accuracy), functionality testing of actuators.


Week 4 (3 hrs): Control systems – electronic devices for controlling energy systems – basic characteristics, areas of application. Controllers and their parameters used in control systems.


Week 5 (3 hrs): Control and regulation in the power grid (frequency, voltage, power), primary, secondary, and tertiary control. Real-world behavior of electricity producers (nuclear, steam, combined-cycle, hydro, pumped-storage, wind, and solar power sources) over the course of a day, week, and year. Non-standard operating states and faults in the power grid.


Week 6 (3 hrs): Control capabilities of individual electricity producers. Active power control capabilities, response to power changes, control ranges, control stability. Partial and total power grid collapse (blackout), causes, and methods for preventing collapse.


Week 7 (3 hrs): Control schemes of steam thermal, nuclear, and combined-cycle power plants. Output control of district heating boilers, waste-to-energy (waste incineration) boilers, and cascade boiler output control. Basic boiler control loops, dynamics of solid-, liquid-, and gas-fired boilers.


Week 8 (3 hrs): Superheated steam temperature control, boiler feedwater control, combustion quality control, furnace draft (negative pressure) control. Control and regulation of individual functional units (fans, compressors, pumps, and other energy equipment).

Computer-assisted exercise

13 hours, compulsory

Syllabus

Week 9 (3 hrs): Design of a feedwater station with a pump controlled by a frequency converter and a pump with discharge throttling control. Comparison of the proposed variants and their impact on operating economics. Specification of input documentation for control.


Week 10 (3 hrs): Hydrogen production from renewable energy sources (RES). Design of the technological solution, control, and regulation. Specification of input documentation for control.


Week 11 (3 hrs): Fundamentals of measurement and data acquisition, temperature measurement, and verification of achievable parameters of thermoelectric and resistance temperature sensors.


Week 12 (3 hrs):Temperature control on a laboratory model, demonstration of pressure and flow measurement in pneumatic circuits.


Week 13 (3 hrs): Presentation of credit projects.