Course detail
Advanced Methods in CFD
FSI-LPM Acad. year: 2027/2028 Winter semester
The course builds on basic computational fluid dynamics (CFD) simulation skills by introducing interdisciplinary problems, particularly interactions between liquids and solid bodies and between liquids and gases. It covers the use of dynamic meshes to simulate the motion of rigid or deformable bodies in a liquid, examines the available approaches to modelling interactions between solid bodies and liquids, and introduces more general multiphase models in which the constituent phases are present in significant quantities or at appreciable volume fractions. The course focuses primarily on practical applications and draws on the capabilities of simulation tools developed by ANSYS, Inc.
Language of instruction
Czech
Number of ECTS credits
3
Supervisor
Department
Learning outcomes of the course unit
Upon completion of the course, students will demonstrate the ability to solve and simulate problems involving the motion of a rigid body in a liquid, either with prescribed motion or with motion driven by forces exerted by the liquid. They will be able to select and correctly configure an appropriate dynamic mesh method for a given problem and generate a computational mesh with a layout suited to the intended simulation. They will understand the principles underlying the various dynamic mesh techniques. These learning outcomes relate to topics 1–4 of the course syllabus.
Students will also demonstrate an understanding of the principles underlying multiphase modelling approaches, including their limitations and advantages, and will be able to simulate multiphase flow using Eulerian–Lagrangian and Eulerian–Eulerian approaches. For each type of simulation, they will be able to select an appropriate solution strategy and adjust the simulation settings to ensure physical consistency and satisfy convergence criteria. These learning outcomes cover topics 5–8 of the syllabus.
Students will also be able to define suitable computational domains for the fluid and structural solvers and couple the two solvers. They will understand the selection of physical quantities transferred between the solvers and be able to perform two-way fluid–structure interaction (FSI) simulations. These learning outcomes will be achieved through topics 9–13 of the syllabus.
Entry knowledge
Students are expected to understand the basic principles of CFD simulation, including the preparation of 3D geometric models, computational mesh generation, formulation of computational models, and evaluation of simulation results, at the level covered in the course Introduction to Computational Fluid Dynamics [MMP].
Students should also understand the relationships between physical principles and numerical methods, particularly the links between flow physics, numerical methods, turbulence model selection and computational mesh quality. This knowledge should include the verification and validation of simulation results and correspond to the level covered in the course Computational Fluid Dynamics [MVP].
Rules for evaluation and completion of the course
Attendance at exercises is compulsory and is recorded. Arrangements for making up missed classes are determined on an individual basis.
The course concludes with a graded course-unit credit. The award of credit and the grade assigned according to the ECTS grading scale are based on students’ independent work on assigned project tasks. The projects are assessed on the basis of submitted technical reports. Each project carries the same maximum number of points. The total score is converted into the final grade according to the ECTS grading scale.
Rules for the use of AI in the course: Students may use AI tools to prepare and support simulation-related tasks when working on their projects, for example for script generation, postprocessing and quantitative analysis. In their technical reports, students must identify which parts were developed with AI assistance and explain how they verified their correctness. Students are responsible for the content of their submitted reports, including simulation settings and the interpretation of results; AI-generated output does not constitute evidence of correctness. Authorship is checked through an oral discussion of the project solution, covering model selection, simulation settings and the interpretation of results.
Resources and limitations: For tasks performed within the ANSYS Fluent solver, it is recommended that the use of AI tools be limited to script generation.
Availability: Students are required to use only free versions of AI tools.
Data requirements: Students must not enter data subject to licensing restrictions or classified information into AI tools. They will be informed of specific cases to which these restrictions apply.
The rules governing AI tools and their use are scheduled for review every two years. Revisions will be informed by the extent to which students use AI in preparing their technical reports and by changes to the ANSYS, Inc. software suite associated with the integration of AI tools.
Aims
The main aim of the course is to extend students’ knowledge of CFD simulation acquired in Introduction to Computational Fluid Dynamics [MMP] and Computational Fluid Dynamics [MVP] by addressing selected problems in fluid mechanics. These include the use of dynamic meshes to model interactions between liquids and rigid or deformable bodies, as well as multiphase simulations involving liquids, gases and solid particles. Upon completion, students should be able to set up and carry out these simulations in practice, select an appropriate modelling approach for each problem, and evaluate the simulation results.
The study programmes with the given course
Programme N-SUE-P: Computational Simulations for Sustainable Energy, Master's, compulsory
Type of course unit
Computer-assisted exercise
26 hours, compulsory
Syllabus
- Introduction to transient CFD simulations using a dynamic computational mesh. Applicability of dynamic meshes to the solution of the motion of rigid bodies in a fluid, such as gates, pistons or valve poppets. Introduction to the properties of the simulated domain and dynamic meshes.
- Simulation using a dynamic computational mesh considering the forced motion of a two-dimensional rigid body with one degree of freedom in a fluid. The motion of the body is defined by known kinematic boundary conditions.
- Simulations of the self-excited motion of a rigid two-dimensional body in a liquid, using a dynamic mesh and allowing one to three degrees of freedom. The body’s motion is driven by forces exerted by the liquid. Options for incorporating mechanical system parameters into the fluid model.
- Simulation using a dynamic computational mesh considering the forced motion of a three-dimensional rigid body with one degree of freedom in a fluid. Comparison of the results of 2D and 3D CFD simulations involving a dynamic computational mesh with one-dimensional mathematical models.
- Introduction to multiphase CFD simulations. Definition and description of basic approaches for multiphase flow simulation.
- Simulation of multiphase flow using Euler – Lagrange approach in the description of the continuum and dispersed phase including e.g. small particles, bubbles or droplets. Possibilities of exchanging momentum, mass and energy between discrete and liquid phases using a discrete phase model (DPM).
- Simulation of multiphase flow using Euler – Euler approach in the mathematical description of interpenetrating continuous phases. Using the VOF model to simulate immiscible fluids such as free-surface fluid flow, stratified flow, or the motion of large bubbles in a fluid.
- Simulation of multiphase flow using Euler – Euler approach in the mathematical description of interpenetrating continuous phases. Simplified Mixture model designed for two or more fluids or particle phases used to study homogeneous flow, sedimentation or cavitation. A complex Eulerian model also applicable, for example, to particle suspensions or chemical reactors.
- Introduction to FSI simulations combining fluid and structural solver affecting the interaction between fluid and deformable body. Differences between one-way and two-way FSI simulation.
- Preparation of a computational model of a two-way 3D FSI simulation including description of fluid, deformable body and solution domain properties and generation of computational meshes.
- Preparation of a computational model of a two-way 3D FSI simulation including the setup of the structural and fluid solver, their coupling and solution monitoring options.
- Implementation of the two-way 3D FSI simulation. Analysis of the results of the 3D FSI simulation with respect to the significant time consumption of the solution.
- Possibilities of realization of one-dimensional two-way FSI simulation. Comparison of one-dimensional and three-dimensional two-way FSI simulation approaches and results.