Course detail
Heat Exchangers
FSI-LVT Acad. year: 2027/2028 Winter semester
The course focuses on the advanced thermohydraulic and structural design of heat exchangers, with particular emphasis on bundle heat exchangers used in the energy sector and industrial applications.
The course builds on the principles of heat transfer and the basic design methods of LMTD and NTU. It covers in detail TEMA standardisation, the structural configuration of bundle heat exchangers, methods for their basic and advanced design, hydraulic and aerodynamic calculations, issues relating to flow-induced vibrations, and the fundamentals of strength analysis.
Another part of the course covers the design principles of phase-change heat exchangers, in particular condensers and boiling systems, the structural and operational specifics of steam generators in nuclear power stations, and the fundamentals of regenerative heat exchanger design.
In the computational exercises, students apply the knowledge they have acquired to the design and assessment of selected types of heat exchangers. The course develops professional competences applicable to the design, technical evaluation and operation of heat transfer equipment in energy and industrial systems.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Department
Learning outcomes of the course unit
Upon successful completion of the module, the student will be able to:
1. Explain the principles of heat transfer and the application of similarity criteria in the design calculations for heat exchangers.
2. Apply the LMTD and NTU methods in the design and verification thermal calculations for heat exchangers.
3. Understand the classification and design principles of bundle heat exchangers in accordance with TEMA standards.
4. Carry out basic and advanced thermohydraulic design of a bundle heat exchanger, including the selection of basic geometric parameters and the evaluation of flow in the shell and tube spaces.
5. Calculate pressure losses for selected types of heat exchangers and assess their impact on the design and operating parameters of the equipment.
6. Explain the mechanisms of flow-induced vibrations, identify the basic risks and propose ways of mitigating them.
7. Carry out basic strength calculations for selected structural elements of the heat exchanger and be familiar with the relevant design requirements.
8. Apply basic design procedures for condensers and boiling heat exchangers.
9. Characterise the design, function and main design and operational specifications of steam generators in nuclear power stations.
10. Explain the principles and procedure for the basic design of regenerative heat exchangers and assess the suitability of their use in selected applications.
11. Compile and provide a technical justification for the results of a selected heat exchanger design calculation.
Entry knowledge
Knowledge of thermomechanics, hydromechanics, heat transfer and the basic principles of the construction and design of heat exchangers at bachelor’s and early master’s degree level is required.
Students should be proficient in drawing up energy and mass balances, basic methods for calculating heat transfer and heat conduction, calculations of flow and pressure losses, and basic procedures for technical calculations. Familiarity with technical documentation and the fundamentals of mechanics and strength of materials is also expected.
In terms of content, this course builds on, in particular, the courses ‘Heat and Mass Transfer’ and ‘Boilers and Heat Exchangers’, or on the corresponding courses from the student’s completed Bachelor’s degree programme.
Rules for evaluation and completion of the course
The course is concluded with a credit assessment and an examination.
Requirements for Obtaining Coursework Credit
The conditions for awarding a credit are active participation in the practical sessions, the successful completion and submission of the term calculation assignment, and the successful completion of the written credit assessment test.
The term assignment focuses on the design calculation of a bundle heat exchanger and assesses the student’s ability to apply the procedures covered in class to solve a specific engineering problem. The assignment is assessed on a pass/fail basis.
The credit test assesses students’ mastery of the calculation methods covered in the practical sessions. To pass the test, students must achieve at least 60 per cent of the maximum number of marks. Credit is awarded only if all the above conditions are met.
Examination Assessment Rules
A prerequisite for sitting the examination is having previously obtained a credit.
The examination is conducted in written form, with the option of an oral review. The written section comprises theoretical questions covering the material discussed in the lectures. Individual questions are marked on a points basis, and the grade is determined by the total number of points obtained, in accordance with the standard ECTS grading scale (A–F).
If the result of the written part is close to the boundary between two grades (±2 percentage points), the examiner may offer the student an oral review. The aim of this is to clarify the student’s level of knowledge. On the basis of the oral review, the final grade may be improved or reduced by no more than one grade level, and only between the two adjacent grades at the boundary of which the result of the written component falls.
The oral review is voluntary. If a student does not take part in it, the mark for the written part stands.
Attendance at classes
Attendance at seminars is compulsory and is monitored by the seminar tutor. A student may make up for an excused absence by arrangement with the seminar tutor.
Attendance at lectures is optional.
Aims
The aim of the course is to deepen students’ knowledge of heat transfer, fluid mechanics and the design principles of heat exchangers, and to develop their ability to apply this knowledge when tackling advanced design and operational problems.
Emphasis is placed on the thermal-hydraulic design of bundle heat exchangers, the use of TEMA standardisation, the assessment of design constraints, pressure losses, vibrations and basic strength requirements. Students will also become familiar with the specific characteristics of phase-change heat exchangers, steam generators in nuclear power stations and regenerative heat exchangers.
The course develops the ability to independently solve defined engineering calculation problems and to critically evaluate proposed technical solutions.
The study programmes with the given course
Programme N-SUE-P: Computational Simulations for Sustainable Energy, Master's, compulsory-optional
Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization ENI: Power Engineering, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
1. Principles of heat transfer, similarity criteria, types of heat exchangers.
2. Methods of thermal design for heat exchangers – LMTD and NTU.
3. Bundled heat exchangers – TEMA classification and standardisation.
4. Bundled heat exchangers – layout and basic structural elements.
5. Basic thermohydraulic design of bundle heat exchangers.
6. Advanced design methods for bundle heat exchangers.
7. Phase-change heat exchangers – condensation and the design of condensers.
8. Phase-change heat exchangers – boiling and the design of boiling equipment.
9. Hydraulic and aerodynamic calculations for heat exchangers.
10. Flow-induced vibrations, their mitigation and the fundamentals of structural analysis of heat exchangers.
11. Steam generators in nuclear power stations – design and operating principles.
12. Steam generators in nuclear power stations – design and operational specifications.
13. Fundamentals of the design of regenerative heat exchangers.
Exercise
26 hours, compulsory
Syllabus
- Revision of the fundamental principles of heat transfer, classification and design parameters of heat exchangers.
- Thermal calculation of a heat exchanger using the LMTD method.
- Thermal calculation of a heat exchanger using the NTU method.
- Design of a bundle heat exchanger – properties of heat transfer fluids and basic geometric parameters.
- Design of a bundle heat exchanger – thermal calculation of the tube and shell spaces, and assessment of flow and structural arrangement.
- Hydraulic and aerodynamic calculation of a heat exchanger.
- Thermal calculation of a condenser.
- Thermal calculation of a boiling heat exchanger.
- Assignment of the term project.
- Independent preparation of the term project – consultations.
- Independent preparation of the term project – consultations.
- Independent preparation of the term project – consultations.
- Credit assessment calculation test.