Course detail
Applied Mechanics
FSI-WAM Acad. year: 2027/2028 Winter semester
Introduction, basic terminology. Stress and strain tensors, principal stresses. Mathematical theory of elasticity, differential approach (equilibrium equations, Hooke´s law, geometrical equations, boundary conditions). Variational approach, principle of virtual work. Finite element method (FEM), displacement version. Fundamentals of linear fracture mechanics. Associated theory of plasticity. Kinematic and isotropic hardening rule, mixed hardening. Mechanics of composite materials, homogenization and elements of micromechanics. Stiffness and strength of the unidirectional fibre composite (lamina) in longitudinal and transversal direction. Stiffness and strength of the short fibre composites. Hooke's law of anisotropic, orthotropic and transversal orthotropic material in the principal material directions, strength conditions. Mechanisms of toughening of brittle matrix composites.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Learning outcomes of the course unit
Upon successful completion of the course, the student will be able to:
1, Explain and apply the fundamental principles and mathematical relationships of the theory of elasticity—specifically differential equilibrium equations, kinematic (geometric) equations, the generalized Hooke’s law, and boundary conditions—to solve problems involving stress and deformation in solids.
2. Formulate and solve linear elasticity problems using differential and variational approaches, including the application of the principle of virtual work and the Lagrange variational principle.
3.Analyze the behavior of elastoplastic materials by employing yield criteria and models of kinematic, isotropic, and mixed hardening.
4. Apply the finite element method to calculate stress and deformation in structural components, develop an appropriate computational model, and perform the analysis using the ANSYS software system.
5. Evaluate fracture mechanics parameters for cracked bodies—notably the stress intensity factor and the J-integral—and assess their impact on crack propagation and the residual service life of a structure.
6. Characterize and evaluate the mechanical properties of composite materials based on the properties of their constituents and their geometric structure, utilizing fundamental micromechanics and homogenization methods.
7. Determine and compare the stiffness and strength of long-fiber and short-fiber composites in longitudinal and transverse directions, accounting for their anisotropic and orthotropic mechanical behavior.
8. Calculate and assess the directional mechanical characteristics of orthotropic and transversely orthotropic materials, and apply relevant strength criteria when evaluating their mechanical response.
8.Prepare and critically evaluate a computational project focused on determining the stress and deformation of a simple structure or composite structure using analytical methods and the finite element method, and interpret the obtained results.
Entry knowledge
Knowledge of basic terms of theory of elasticity (stress, strain, general Hooke's law), fundamentals of linear elasticity theory of beams and shells. Fundamentals of theory of limit states (criteria of plasticity and brittle strength).
Rules for evaluation and completion of the course
The course-unit credit conferment is based on the successful defence of the final project, having character of a practical computation of stress and strain states of a simple construction or composite material structure utilizing classic approaches as well as the Finite Element Method (FEM) program system ANSYS and followed by critical judging of results. The exam is combined; it consists of a written review test and of an oral interview.
Attendance at practical training is obligatory. An excused absence can be made up by completing individual assignments set by the teacher.
Aims
The aim is to make students familiar with methods and approaches in determination of stress and strain states at general bodies of linear elastic and elasto-plastic materials. Students will learn of the influence of cracks on the stress and strain states and with possibilities of residual lifetime evaluation. In the chapter dealing with composite materials, the students get acquainted with the methods of determination of mechanical properties of a composite material on the basis of knowledge of geometrical structure and properties of individual components. Moreover, students will understand the anisotropic and orthotropic behaviour of composites at the level of continuum as a consequence of the directional structure of the material.
Students learn basic methods of determination of stress and strain states at general bodies, based on differential and variational approach. They get practical experience in using of finite element method (Program system ANSYS) in solving stress and strain states of simple structures. The knowledge of the negative influence of cracks on the lifetime and basic knowledge about the mechanical behaviour of composite materials is important as well.
The study programmes with the given course
Programme N-MTI-P: Materials Engineering, Master's, compulsory
Type of course unit
Lecture
39 hours, optionally
Syllabus
1.Basic equations of mathematical theory of elasticity. Differential equations of equilibrium, geometrical equations, general Hooke’s law. Boundary conditions.
2.Differential formulation of problem of elasticity in displacements. Possibilities of solution. Variational formulation, virtual work principle, Lagrangean variational principle.
3. Mises condition of plasticity. Kinematic and isotropic hardening. Prager and Ziegler condition for plasticity surface displacement.
4. Associated theory of plastic flow with combined hardening. Basic assumptions. Normality rule, strain superposition principle.
5.Deformational variant of finite element method (FEM) for a two-dimensional problem. Triangulation, approximate functions for displacements, problem discretization.
6.FEM equilibrium equation for an element and the whole body. Local and global stiffness matrix.
7. Fundamentals of linear fracture mechanics. Stress intensity factor (SIF) K, J-integral, crack tip opening CTOD. Stress and strain states for the three basic modes I, II and III.
8.Paris-Erdogan’s law. Residual lifetime of the body with a defined crack. Possibilities of SIF evaluation for a generally located crack using FEM.
9.Mechanics of composite materials. Definition and basic terms, classification of composites. Mechanical properties of fibres and of matrix materials
10. Introduction to micromechanics and homogenization of composite materials. Hooke’s law for isotropic, orthotropic and transversally isotropic materials in principal material directions and in general directions. Directional stiffness matrix. Strength conditions.
11. Unidirectional long-fibre composite loaded in longitudinal direction. Elasticity modulus and strength. Critical and minimal volume of fibres.
12.Short-fibre unidirectional composite. Theory of load bearing. Transmission and critical length. Elasticity modulus in tension and strength.
13. Mechanisms of toughening of brittle matrix composites.
Computer-assisted exercise
26 hours, compulsory
Syllabus
1.Basic equations of mathematical theory of elasticity. Equilibrium equations. Geometrical equations. General Hooke’s law
2. Stress state in a point of body, principal stresses, principal coordinate system.
3.Differential formulation of problem of elasticity in displacements. Lame’s equations. Yield criterion.
4. Virtual work principle. Lagrange’s principle. Ritz method.
5.Deformational variant of finite element method (FEM). Basic FEM equations. Introduction into FEM program system ANSYS. Basic types of elements.
6. FEM model creation in the FEM program system ANSYS. Solution of a simple two-dimensional beam structure
7.2D modelling with utilization of plane stress, plane strain and rotational symmetry vs 3D models.
8.Calculation of fracture mechanical parameters – stress intensity factor (SIF) K, J-integral.
9.FEM determination of plastic zone ahead of a crack tip using various yield criteria.
10.Homogenization of fibre composites using FEM -Material characteristics in longitudinal direction.
11. Homogenization of fibre composites using FEM -Material characteristics in transversal direction. Effective temperature expansion of a composite in various directions.
12.Final project.
13.Credit.