Course detail
Technical Diagnostics II
FSI-XT2 Acad. year: 2027/2028 Winter semester
The course focuses on methods of the technical diagnostics of machines and equipment and follows on from the facts presented in the course Technical Diagnostics I, which it further develops. Attention is concentrated on the issues of vibrodiagnostics, noise diagnostics, defectoscopic diagnostics, tribodiagnostics, electrodiagnostics and remote diagnostics of machines.
The importance and application of multiparameter diagnostics is demonstrated. By completing this course and the course Technical Diagnostics I, the student acquires comprehensive knowledge of the technical diagnostics of machines and equipment. The knowledge conveyed is based on the content of the Industry 4.0 and Maintenance 4.0 initiatives.
The laboratory exercises are conducted in diagnostics laboratories, in which students carry out their own measurements, process the measured data and evaluate the condition of an assigned technical object. The exercises include the integration of the results of several diagnostic methods into a common diagnostic conclusion.
Language of instruction
Czech
Number of ECTS credits
6
Supervisor
Entry knowledge
The student is able to explain the structure of a diagnostic system and the classification of diagnostic signals, and is able to select a suitable technical diagnostics method for an assigned technical object and justify the choice.
The student is able to perform contact and non-contact temperature measurement and determine the measurement uncertainty. The student is able to process measured data by means of statistical and frequency analysis and the Fourier transform, and to explain the principles of mechanical vibration, in particular natural frequency, damping and resonance. The student is able to describe the fundamentals of tribology, in particular friction, wear and lubrication, and the fundamentals of electrical engineering, in particular electrical machines and insulation systems.
Rules for evaluation and completion of the course
The course is completed by a course credit and an examination.
Course credit requirements
Compulsory attendance at laboratory exercises. Tolerance of one excused absence; the method of making up for missed instruction shall be determined by the teacher.
Continuous fulfilment and submission of measurement records from the laboratory tasks, always by the following exercise, subject to acknowledgement by the teacher.
Elaboration of an individual assignment in the form of a multiparameter diagnostic report on an assigned rotating machine, comprising vibrodiagnostics, thermography and tribodiagnostics, an evaluation and a diagnostic conclusion, in the range of 10 to 15 standard pages. The report shall be submitted no later than in the 12th teaching week and shall be presented and defended in the 12th teaching week.
A maximum of 0 to 15 points may be awarded for the measurement records and 0 to 15 points for the individual assignment and its defence, i.e. 0 to 30 points in total.
The course credit is awarded upon fulfilment of the attendance requirement; the score achieved may be as low as 0 points. The course credit is awarded in the 13th teaching week; the content of the 13th teaching week is the verification of the results of the exercises and the award of the course credit.
Examination
The examination takes the form of a written test covering the areas of vibrodiagnostics, noise diagnostics, non-destructive testing, tribodiagnostics, electrodiagnostics and multiparameter diagnostics. A maximum of 0 to 70 points may be obtained from the test.
Only a student who has been awarded the course credit may sit the examination.
Final classification
The overall assessment consists of the points from the exercises (0 to 30 points) and the points from the examination (0 to 70 points), i.e. 100 points at most.
Classification scale: A 90 to 100 points, B 80 to 89 points, C 70 to 79 points, D 60 to 69 points, E 50 to 59 points, F 0 to 49 points.
Aims
The objective of the course is the acquisition of further theoretical and practical knowledge in the field of the diagnostics of technical systems. In terms of content the course follows on from the course Technical Diagnostics I.
In the sense of the annotation given above, the student acquires further extensive and comprehensive knowledge in the field of the diagnostics of technical systems, which will enable the student to become expertly involved in industrial mechanical engineering and electrical engineering practice in solving various problems related to the given field.
The study programmes with the given course
Programme N-KSB-P: Quality, Reliability and Safety, Master's, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
1. Vibrodiagnostics – introduction, excitation force, vibration response, basic quantities, sensors, smart sensors
2. Vibrodiagnostics – vibration measurement
3. Vibrodiagnostics – frequency analysis
4. Vibrodiagnostics – imbalance, misalignment, plain bearings
5. Vibrodiagnostics – rolling bearings, ODS method, modal analysis
6. Sound (noise) diagnostics – introduction, machine diagnostics: sound pressure and power level, acoustic filters, machine noise, machine noise sources, noise criteria, European directives, standards
7. NDT (non-destructive methods)
8. NDT (non-destructive methods)
9. Tribodiagnostics of lubricants and machine nodes
10. Tribodiagnostics of lubricants and machine nodes
11. Electrodiagnostics – introduction, methods
12. Electrodiagnostics – determining the state of machine nodes
13. Remote machine diagnostics, on-line machine diagnostics and Industry 4.0, multiparametric diagnostics
Laboratory exercise
26 hours, compulsory
Syllabus
1. Introduction, organizational issues, safety of work, basics of technical diagnostics, instrument diagnostic tools
2. Characteristics of instrumentation used in practice. Basic parameters of instruments, basic operation of instruments
3. Vibrodiagnostics – data processing, determination of rotational systems
4. Vibrodiagnostics – data processing, determination of rotational systems
5. Vibrodiagnostics – data processing, determination of rotational systems
6. Vibrodiagnostics – balancing of rotating machines
7. Vibrodiagnostics – balancing of rotating machines
8. Sound (noise) diagnostics
9. Electrodiagnostics
10. Online diagnostics of machines
11. Online machine diagnostics
12. Completion and evaluation of technical reports (protocols)
13. Credit