Course detail
Constructive Geometry
FSI-1KD Acad. year: 2027/2028 Winter semester
The constructive geometry course summarizes and clarifies basic geometric concepts, including basic geometric projections, and introduces students to some types of projections, their properties and applications. Emphasis is placed on orthogonal axonometry. The basics of plane kinematic geometry are also presented. A large part of the course is devoted to the representation of curves and surfaces of engineering practice and some necessary constructions such as plane sections and intersections.
The constructions are complemented by modeling in Rhinoceros software.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Department
Learning outcomes of the course unit
The aim of the course is to develop students' spatial reasoning skills and provide them with a comprehensive overview of the fundamental concepts, principles, and methods of analytic and constructive geometry.
The course focuses on solving geometric problems in the plane and in three-dimensional space, methods of representing spatial objects, the geometric properties of selected curves and surfaces, and the relationships between analytic and geometric construction methods.
The course also includes the practical application of geometric methods to engineering problems and three-dimensional modelling using computer-aided tools.
Entry knowledge
The students have to be familiar with the fundamentals of geometry and mathematics at the secondary school level.
Rules for evaluation and completion of the course
COURSE-UNIT CREDIT REQUIREMENTS:
Draw up 2 semestral works (each at most 5 points), there is one written test (the condition is to obtain at least 5 points of maximum 10 points). The written test will be in the 9th week of the winter term approximately. At least 10 points is required. Active participation in the exercise is also required, which the teacher has the right to verify with the student's knowledge or his/her own notes on the topic being discussed.
FORM OF EXAMINATIONS:
The exam has an practical and theoretical part. In a 90-minute practical part, students have to solve 3 problems (at most 80 points). The student can obtain at most 20 points for theoretical part.
RULES FOR CLASSIFICATION:
1. Results from the practical part (at most 80 points)
2. Results from the theoretical part (at most 20 points)
Final classification:
0-49 points: F
50-59 points: E
60-69 points: D
70-79 points: C
80-89 points: B
90-100 points: A
Attendance at seminars is required. The way of compensation for an absence is fully at the discretion of the teacher.
Aims
The aim of the course is to deepen spatial imagination, to introduce students to the principles of representation and important properties of some curves and surfaces. The aim of the course is to introduce students to the basics of the international language of engineers, i.e. descriptive geometry, so that they can then creatively apply this knowledge in professional subjects and in the use of computer technology.
Students will acquire the basic knowledge of three-dimensional descriptive geometry necessary to solve real life situations in various areas of engineering.
The study programmes with the given course
Programme B-ENE-P: Energy, Bachelor's, compulsory
Programme B-PRP-P: Professional Pilot, Bachelor's, compulsory
Programme B-STR-P: Engineering, Bachelor's
specialization AIŘ: Applied Computer Science and Control, compulsory
Programme B-STR-P: Engineering, Bachelor's
specialization KSB: Quality, Reliability and Safety, compulsory
Programme B-STR-P: Engineering, Bachelor's
specialization SSZ: Machine and Equipment Construction, compulsory
Programme B-STR-P: Engineering, Bachelor's
specialization STG: Manufacturing Technology, compulsory
Programme B-ZSI-P: Fundamentals of Mechanical Engineering, Bachelor's
specialization STI: Fundamentals of Mechanical Engineering, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
Conic Sections – Focal properties of conic sections, pointwise constructions of conics, osculating circles, construction of tangents from a given point, diameters and centres of conics, conjugate diameters.
Analytic Geometry I – Analytic geometry in the plane, problems involving lines, classification of conic sections.
Kinematics – Planar kinematic geometry, cycloidal curves.
Geometric Transformations and Projections – Central and parallel projections and their properties (points, lines, planes, parallel and perpendicular lines), collineations between planes, central collineation, axial affinity, points at infinity (projective axiom, homogeneous coordinates of finite points and points at infinity), derivation of parametric equations of kinematic curves in the projective plane.
Orthographic Axonometry I – Fundamentals of axonometry, orthographic axonometry, construction of the bases and heights of solids.
Analytic Geometry II – Analytic geometry in three-dimensional space, equations of lines and planes, relative positions of lines and planes, distances and angles in space, orthogonal projections.
Orthographic Axonometry II – Representation of solids and construction of their planar sections.
Helices I – Construction of helices in axonometric projection.
Helices II – Derivation of parametric equations of helices, classification and geometric properties of helices.
Helical Surfaces – Generation, basic types, and geometric properties of helical surfaces.
Monge's Projection I – Fundamental principles of Monge's projection, representation of points, lines, and planes.
Monge's Projection II – Representation of solids and construction of their planar sections.
Surfaces of Revolution and Quadrics – Generation and fundamental geometric properties of surfaces of revolution, their parametric representations and constructions. Parametric and general equations of quadrics, classification of basic types of quadrics, and their geometric properties.
Computer-assisted exercise
26 hours, optionally
Syllabus
Conic Sections – Construction of conic sections using their focal properties, construction of tangents, osculating circles, and other characteristic elements.
Analytic Geometry I – Solving problems in plane analytic geometry, equations of lines, relative positions of lines, classification of conic sections based on their equations.
Kinematics – Construction of cycloidal curves, modelling of planar motions, and visualization of selected kinematic curves.
Geometric Transformations and Projections – Construction problems involving central and parallel projections, central collineation, axial affinity, points at infinity, and homogeneous coordinates.
Orthographic Axonometry I – Representation of points, lines, and planes, construction of the bases and heights of solids in orthographic axonometry.
Analytic Geometry II – Solving positional and metric problems in three-dimensional space, equations of lines and planes, intersections, distances, angles, and orthogonal projections. Three-dimensional visualization of solutions.
Orthographic Axonometry II – Construction of polyhedral and simple solids of revolution in orthographic axonometry, construction of their planar sections.
Helices I – Construction of helices in axonometric projection, geometric properties of helices, and their three-dimensional modelling.
Helices II – Parametric representation of helices, modelling of different types of helices, and verification of their geometric properties.
Helical Surfaces – Construction and three-dimensional modelling of selected helical surfaces, applications of helical motion.
Monge's Projection I – Orthographic projections of points, lines, and planes onto two mutually perpendicular projection planes, basic positional problems in Monge's projection.
Monge's Projection II – Construction of polyhedral and simple solids of revolution in Monge's projection and their planar sections.
Surfaces of Revolution and Quadrics – Construction and modelling of selected surfaces of revolution, working with parametric and general equations of quadrics, classification and three-dimensional visualization of basic types of quadrics.