Course detail

Automation

FSI-6AA-A Acad. year: 2027/2028 Winter semester

The course provides the fundamentals of automatic control theory and their application to the control design of mechanical engineering systems. It builds on knowledge of mechanics and dynamics and extends it towards the description, analysis and control of dynamic systems.
Teaching focuses on understanding system behaviour. Theoretical concepts – transfer function, poles and zeros, frequency responses, stability – are continuously verified by simulation. The course covers logic control and programmable logic controllers, the analysis and synthesis of continuous-time control loops including controller tuning, and an introduction to discrete-time control focused on the significance of sampling and discretisation.
Exercises are held in MATLAB/Simulink; laboratory sessions are devoted to the design of logic control in Siemens LOGO!Soft. The course includes an individual project covering plant modelling and controller design and tuning.

Language of instruction

English

Number of ECTS credits

5

Entry knowledge

The student can derive the equation of motion of a simple mechanical system (mass, spring, damper; translational and rotational motion) and describe an R, L, C circuit. The student can solve linear ordinary differential equations with constant coefficients and work with complex numbers. Basic MATLAB skills are an advantage.

Rules for evaluation and completion of the course

Course-unit credit (max. 30 points): a project – model of an assigned plant, control design and tuning, and verification in simulation; assigned in week 4, defended in week 13. The credit requires at least 15 points (50 %) from the project.

Examination (max. 70 points): written; problems and questions on interpreting system behaviour (responses, frequency characteristics, pole locations) from all parts of the course. The examination is passed with at least 35 points (50 %).

Final grade: sum of the project and examination points (max. 100) on the ECTS scale per Art. 14 of the BUT Study and Examination Rules: A 90–100, B 80–89, C 70–79, D 60–69, E 50–59, F 0–49.

Attendance: attendance at lectures and exercises is compulsory and checked by the tutor. One absence from an exercise can be made up by attending another group in the same week or by a substitute task; a longer absence is made up by written substitute tasks set by the tutor. Unexcused absence means the credit is not awarded.

Aims

On completing the course, the student is able to:

  1. design combinational or sequential logic control from a verbal specification, minimise the logic function and verify the design in LOGO!Soft;
  2. convert a model of a mechanical or electrical system into a transfer function and explain its behaviour from the pole locations and the time and frequency responses;
  3. assess the stability of a control loop algebraically and from frequency responses and determine the steady-state error;
  4. select a controller type, tune it by the Ziegler-Nichols method or from the step response, and verify control performance in simulation;
  5. explain the effect of sampling and the hold element on a control loop and choose a suitable sampling period.

Study aids

Lecture slides, exercise assignments and MATLAB/Simulink models, laboratory instructions and the project assignment are available in English in the course on the BUT e-learning (Moodle).

The study programmes with the given course

Programme B-STI-Z: Fundamentals of Mechanical Engineering, Bachelor's, recommended course

Type of course unit

 

Lecture

26 hours, compulsory

Syllabus


  1. Open-loop and feedback control, examples from mechanical engineering. Logic control: logic functions, Boolean algebra, Karnaugh map minimisation.

  2. Combinational and sequential logic circuits, programmable logic controllers, design from a verbal specification (corridor lighting, lift, level crossing).

  3. From the equation of motion to the transfer function: the Laplace transform as a tool, transfer function, poles and zeros and what they mean for system behaviour.

  4. Time responses: impulse and step response, first- and second-order systems (time constant, damping, natural frequency), transport delay.

  5. Frequency responses in the complex plane and in logarithmic coordinates and their physical meaning. Block diagram algebra.

  6. The control loop and P, I, D, PI, PID controllers – what each term does to the response.

  7. Stability: pole locations, characteristic equation, algebraic criteria.

  8. Frequency stability criteria, phase and gain margins, steady-state accuracy.

  9. Control performance, controller tuning by the Ziegler-Nichols method and from the plant step response.

  10. Cascade control and two-degree-of-freedom controllers – principle and use.

  11. The controller on a computer: sampling, A/D and D/A conversion, zero-order hold, the sampling theorem, aliasing.

  12. Why discretisation matters: discrete plant model, choice of sampling period, effect of sampling on stability and control performance.

  13. The controller in practice – practical demonstration: actuator saturation and windup, anti-windup, derivative filtering, reference trajectory generation (ramp, S-curve) to avoid step changes in the setpoint.

Laboratory exercise

4 hours, compulsory

Syllabus


  1. Combinational logic control: from a verbal specification through a truth table and Karnaugh map to implementation in LOGO!Soft.

  2. Sequential logic control (e.g. lift, level crossing), implementation and debugging in LOGO!Soft.

Computer-assisted exercise

22 hours, compulsory

Syllabus

In weeks 2 and 3 a laboratory session takes place.



  1. Logic control: algebraic minimisation, block diagrams, introduction to Siemens LOGO!Soft.

  2. Plant model and transfer function in MATLAB/Simulink, effect of poles on the response. Project assignment.

  3. Time responses of first- and second-order systems, effect of damping and transport delay.

  4. Frequency responses and block diagram algebra in simulation.

  5. The control loop, effect of PID terms on the response.

  6. Stability: pole locations, algebraic criteria, verification in simulation.

  7. Frequency stability criteria, phase and gain margins.

  8. Controller tuning by the Ziegler-Nichols method and from the step response in simulation.

  9. Control performance; the same controller with sampling – effect of the sampling period.

  10. Project consultation.

  11. Project defence, credit.