Course detail
Fuels, Combustion and Gas Turbines
FSI-LPS Acad. year: 2027/2028 Winter semester
The course focuses on the properties of conventional and alternative fuels and their impact on the design, operation, and efficiency of energy equipment. The introduction summarizes the fundamentals of applied thermodynamics of multicomponent systems (fuel mixtures, moist air, and flue gases) and the stoichiometry of combustion processes. Attention is given to gaseous, liquid, and solid fuels, including municipal solid waste (MSW), 1st- to 4th-generation liquid biofuels, hydrogen technologies (the Power-to-X concept), and synthetic e-fuels produced using carbon capture (CCUS). Furthermore, the course covers the energy balance of the combustion process and the determination of the adiabatic flame temperature, the design and operating modes of gas turbines (ISO design conditions, base load, partial load), pre-combustion fuel treatment, transport, and storage (including fire and explosion hazards), chemical equilibrium and combustion kinetics, and burner design. Theoretical lectures are complemented by computer exercises focused on balance calculations and the modeling of combustion processes and gas turbines.
Language of instruction
Czech
Number of ECTS credits
5
Supervisor
Department
Entry knowledge
Knowledge of the fundamentals of engineering thermodynamics (state behavior of gases, first and second laws of thermodynamics), fluid mechanics, heat transfer, fundamentals of general and physical chemistry, and principles of turbomachinery (compressors and gas turbines). Basic skills in using computational software.
Rules for evaluation and completion of the course
Requirements for awarding course credit and attendance control:
Lectures are optional. Computer-aided exercises are mandatory, and attendance is monitored by the instructor; excused absences must be made up by agreement with the instructor. To be awarded course credit, active participation in the exercises, submission of ongoing calculations, and completion and submission of a credit project according to the assignment are required.
Examination and final grading rules: The exam is written and consists of three parts:
- a calculation problem (weight 1/3),
- general open-ended questions (weight 1/3),
- test questions (weight 1/3).
The final course grade is based on the overall evaluation of the written exam according to the ECTS grading scale pursuant to Article 14 of the BUT Study and Examination Regulations.
- A (excellent): 100–90%
- B (very good): 89–80%
- C (good): 79–70%
- D (satisfactory): 69–60%
- E (sufficient): 59–50%
- F (failed): 49–0%
Aims
Upon completing the course, the student is able to:
Professional knowledge:
Compare the physicochemical and energy properties of conventional fossil fuels, waste, 1st–4th generation biofuels, hydrogen (Power-to-X), and synthetic e-fuels (CCUS) in terms of their production, energy intensity, and application in a transitioning energy sector.
Explain the thermodynamic and reaction-kinetic principles of combustion processes, including the behavior of multicomponent mixtures, chemical equilibrium, high-temperature dissociation of flue gases, and flame stability conditions.
Describe the structural design and operational specifics of burners, combustion chambers, and equipment for pre-combustion fuel treatment, transport, and storage, including associated fire and explosion hazards.
Professional skills:
Calculate stoichiometric combustion parameters, the flue gas dew point, and the adiabatic flame temperature for solid, liquid, and gaseous fuels.
Compile the mass and energy balance of a combustion device, including determining the required power of auxiliary equipment and the feedstock or land-use requirements of the fuel.
Assess the impact of changes in fuel mixture composition and operating parameters (excess air, flue gas recirculation, oxygen enrichment, and operating modes – base load and partial load) on temperature conditions, operating states, and the efficiency of energy equipment.
Study aids
Study supports are located on e-learning.
The study programmes with the given course
Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization ENI: Power Engineering, compulsory
Type of course unit
Lecture
26 hours, optionally
Syllabus
1. Applied thermodynamics in the field of fuels and combustion. Ideal, idealized, and real gas behavior, equations of state, and thermodynamics of multicomponent systems (fuel mixtures, moist air, and flue gases).
2. Gaseous and liquid fuels. Characteristics and properties of gases: natural gas, LNG, CNG, biogas, sewage gas, bioCNG (bio-methane), landfill gas, mine degasification gas, coke oven gas, and blast furnace gas. Crude oil and petroleum derivatives.
3. Fuel combustion – stoichiometry of the combustion process. Molar, volumetric, and mass combustion stoichiometry. Calculation of theoretical and actual combustion air requirements and flue gas production.
4. Solid fuels, biofuels, and municipal solid waste. Fuel characteristics, composition, and energy utilization of solid fuels, solid biofuels, and municipal solid waste (MSW). Coal phase-out, energy transition, and revitalization of affected regions.
5. Adiabatic flame temperature. Mass and energy balance of the combustion chamber, calculation of the adiabatic flame temperature. Influence of fuel and process parameters on the uncooled flame temperature, high-temperature dissociation of flue gases.
6. Gas turbines I. Basic concepts and main components of gas turbines. Types of combustion chambers and burners. Balance calculations of the compressor, combustion chamber, and expansion turbine.
7. Gas turbines II – design and operating conditions. Design of gas turbines for ISO standard conditions. Base load operation and the influence of intake air temperature; control and the effect of load variation at constant intake air temperature (partial load).
8. Energy storage and hydrogen technologies. Electrical energy storage options (the Power-to-X concept). Hydrogen as an energy carrier, hydrogen production technologies (electrolysis, steam reforming, etc.), and power-to-hydrogen energy storage.
9. 1st- to 4th-generation liquid biofuels. Feedstock base and technological production processes of 1st–4th generation biofuels. Physicochemical properties and application possibilities in transport and power engineering. Energy and land-use intensity of producing individual generations.
10. Synthetic gaseous and liquid fuels (e-fuels). Production of synthetic natural gas (SNG), methanol, and synthetic liquid hydrocarbons. Carbon capture processes (CCUS) and subsequent synthesis (methanation, Fischer–Tropsch synthesis). Overall chain efficiency and energy intensity of production.
11. Pre-combustion preparation and transport of solid, liquid, and gaseous fuels. Transport, unloading, storage, storage tanks and hoppers, conveyors, and pre-combustion fuel treatment. Potential fire and explosion hazards.
12. Chemical equilibrium of combustion processes and kinetics of combustion reactions. Thermodynamic equilibrium of combustion processes, combustion reaction kinetics, chemical reaction rates, ignitability, and flame stability.
13. Burners. Design, classification, and operating principles of burners for solid, liquid, and gaseous fuels, including duct burners.
Computer-assisted exercise
26 hours, compulsory
Syllabus
1. Calculation of compressibility factor variations for air components at different temperatures and pressures. Commentary on the impact of neglecting real gas properties on calculation accuracy. Conversion of solid fuel composition.
2. Stoichiometry of solid fuel, calculation of combustion air requirements and flue gas production. Balance check.
3. Determination of the flue gas dew point temperature and saturation temperatures of other gases. Balance calculation of daily fuel consumption for the Maloměřice heating plant boiler (ktM). Land area required for growing fast-growing biomass to supply the boiler.
4. Calculation of air fan power for a biomass-fired grate boiler (ktM).
5. Analysis of municipal waste incineration plant capacity in the Czech Republic: analysis of existing facilities, analysis of pre-implementation and planned projects, comparison with waste generation, calculation of steam production based on the quantity and composition of waste at SAKO Brno, firing diagram of the grate and boiler, and explanation of operating states.
6. Calculation of the adiabatic flame temperature for a biomass-fired grate boiler (ktM).
7. Analysis of the effect of changing operating conditions on the adiabatic flame temperature: effect of feedstock, effect of the excess air ratio, effect of oxygen enrichment of combustion air, and effect of recirculated flue gas (temperature, recirculation ratio).
8. Retrieval of the current natural gas composition for Brno and conversion to a hydrogen molar fraction in the range of 0–100%. Preliminary calculations for a gas turbine combustion chamber operating on a natural gas–hydrogen blend.
9. Calculation of the adiabatic flame temperature for a gas turbine combustion chamber operating on a natural gas–hydrogen blend. Development of a compressor model.
10. Turbine expansion model. Mass and energy balance.
11. Assessment of the impact of hydrogen addition in the fuel blend on the gas turbine unit as a whole.
12. Chemical equilibrium and kinetics of combustion reactions.
13. Final review of challenging problems, discussion.