Course detail

Fluid Power Modeling

FSI-MTM Acad. year: 2027/2028 Summer semester

The course introduces the fundamentals of mathematical modelling of positive-displacement pumps and motors, selected pneumatic components, and the dynamics of fluid power systems.

In the area of fluid power system modelling, the course introduces basic concepts, definitions and problems, and explains how mathematical models of typical hydraulic and pneumatic circuit components are developed with reference to their operating parameters. It examines the relationship between a device’s characteristics, its mathematical and physical description, and the level of sophistication of the model. It also covers model analysis and the characteristics of fluid power components that can be inferred from this analysis.

Exercises complement and extend the material covered in lectures through basic analytical solutions and the determination of key parameters of components and circuits.

Language of instruction

Czech

Number of ECTS credits

4

Department

Learning outcomes of the course unit

Upon completion of the course, students will demonstrate the ability to develop and analyse one-dimensional mathematical models of basic hydraulic components operating in combination with hydraulic lines. These components include rotary hydraulic pumps and motors, hydraulic cylinders, hydraulic accumulators, and hydraulic control components. Students will also be able to develop and analyse models of selected pneumatic components, namely pneumatic cylinders and vane air motors. They will acquire the fundamental methods required to develop these models and address specific challenges associated with nonlinearities. They will be able to assess the stability of a system comprising hydraulic components and evaluate its step response. In pneumatic systems, students will develop not only the knowledge and skills needed to model the components listed above, but also the ability to characterise the resistive, inertial and elastic effects involved in energy transfer, determine flow rates through a system, and calculate pneumatic stiffness.

During exercises, students will learn to apply the electrical–hydraulic analogy to quantify the resistive, inertial and elastic effects associated with energy transfer, representing opposition to motion, acceleration and deformation, respectively. Building on these skills, students will be able to perform calculations for the starting and braking of hydraulic drives, model piping systems, determine the magnitude frequency response of a system, and calculate the natural frequencies of selected components. The exercises will also broaden students’ understanding of control component modelling through the modelling of valves and cover selected additional topics in pneumatic component modelling.

Entry knowledge

Prerequisite knowledge: differential and integral calculus [1M, 3M], hydrostatics and hydrodynamics [5HY], and gas dynamics [6TT].

Students are required to have knowledge of differential and integral calculus, including, at a minimum, the ability to solve second-order ordinary differential equations and evaluate definite integrals. This mathematical background is essential, particularly for selected calculations involving the modelling of piping systems and individual hydraulic and pneumatic components.

Hydrostatic and hydrodynamic principles are applied extensively in both lectures and exercises across most topics covered in their respective syllabuses.

In the study of pneumatic components, the main concepts drawn from gas dynamics are the properties of gases, the law of conservation of energy, thermodynamic state variables, thermodynamic processes, and the ideal gas equation of state.

Rules for evaluation and completion of the course

Course-unit credit is awarded on the basis of satisfactory attendance and the ongoing demonstration of knowledge of the course material. Students actively participate in solving selected problems and demonstrate their ability to apply the key concepts introduced in lectures by answering questions and proposing their own approaches to solving these problems. Emphasis is placed on students’ efforts to explain their proposed approaches, including the underlying physical principles or relevant concepts covered in lectures, with guidance and corrections from the teacher. The minimum competencies required in exercises comprise an understanding of resistive, inertial and elastic effects in energy transfer, the ability to account for these effects in calculations, and the ability to perform calculations for the starting and braking of a hydraulic drive.

The examination assesses students’ knowledge of the course material and their ability to apply it to specific problems. It comprises a written component and an optional oral component. The oral component serves to refine the assessment and resulting grade in response to points raised by students. Any student who requests the oral component from the teacher on the day of the examination will be given the opportunity to take it.

The written examination consists of theoretical and practical sections. The theoretical section comprises questions and tasks that provide balanced coverage of the individual topics specified in the lecture syllabus. Each question carries the same maximum number of points, which students can earn by answering it correctly. The practical section consists of problems covering selected topics from the exercise syllabus. Each problem carries the same maximum number of points.

The minimum requirements for the course are an understanding of resistive, inertial and elastic effects in energy transfer and of the mathematical models of rotary hydraulic motors and pumps, together with a score of at least 50% of the points available in the theoretical section of the examination. At the end of the examination, the combined score from the practical and theoretical sections is converted into a final grade according to the applicable ECTS grading scale.

Aims

The ability to develop mathematical and simulation models of fluid power components and basic fluid power circuits to predict system behaviour and analyse these systems.

The overall aim of the course is to develop students’ understanding of mathematical models of fluid power systems to a level that enables them to independently formulate models of individual components using equations of motion and balance equations, analyse these models, and modify existing models.

The study programmes with the given course

Programme N-ETI-P: Power and Thermo-fluid Engineering, Master's
specialization FLI: Fluid Engineering, compulsory

Type of course unit

 

Lecture

13 hours, optionally

Syllabus


  1. Hydraulic mechanisms mathematical modelling – basic concepts and definitions, non-linearities, specific problems.

  2. Mathematical modelling of elementary hydraulic elements.

  3. Transfer functions and system stability.

  4. Mathematical model of hydraulic rotary pump.

  5. Mathematical model of hydraulic motor.

  6. Speed regulation of hydraulic motor.

  7. Mathematical model of hydraulic cylinder.

  8. Mathematical model of hydraulic accumulator.

  9. Mathematical models of control elements and hydraulic lines.

  10. Laws of air flowing through tubing, air spring stiffness.

  11. Mathematical model of pneumatic cylinder.

  12. Mathematical model of pneumatic vane motor.

  13. Energy conversion resistances, flow and throttle calculation in a pneumatic system.

Laboratory exercise

13 hours, compulsory

Syllabus


  1. Resistance against motion computations.

  2. Resistance against acceleration computations.

  3. Resistance against deformation computations.

  4. Pipeline modelling.

  5. Valves modelling.

  6. Determination of amplitude frequency response and maximum amplitude of resonance peak.

  7. Linear mathematical model and step response of the system.

  8. Analytic computation of hydraulic mechanism acceleration and deceleration.

  9. Forced oscillations in the hydraulic circuit.

  10. Calculation of natural frequency of linear hydraulic motor.

  11. Pneumatic computations of a pneumatic system elements.

  12. Description of mathematical model of simple hydraulic circuit.

  13. Computation of pressure and flow relations in a system equipped with a piston pump.