Course detail
Mechanics, Durability and Reliability
FSI-ZSY Acad. year: 2027/2028 Winter semester
The course aims to develop student's ability to independently formulate, critically assess, and justify physical models of mechanical components and systems, interpret their responses, and apply the acquired knowledge to the assessment of limit states, service life, and reliability. The course focuses on the physical foundations and engineering interpretation of modelling rather than on the numerical methodologies underlying FEM, CFD, or MBS.
The course builds on knowledge acquired during undergraduate studies in subjects related to the structural response of materials, structural reliability, and numerical simulations in mechanical engineering. The emphasis shifts from solving predefined computational models to the independent formulation, selection, and physical justification of models describing the mechanical behaviour of real-world mechanical components and systems. The unifying framework of the course follows the sequence real system – physical model – response – limit state – service life – reliability, with particular emphasis on the appropriateness of the selected model, its underlying assumptions, limitations, and uncertainties.
The course covers the fundamental equations of continuum mechanics, particularly conservation laws, equations of equilibrium and motion, kinematic and constitutive relations, and their application to selected one-dimensional (1D) and, where appropriate, two-dimensional (2D) problems. Attention is given to the idealisation of real-world systems, the selection of an appropriate level of model fidelity, the formulation of initial and boundary conditions, and the assessment of how modelling assumptions and uncertainties influence the predicted response.
In the field of dynamics, the course focuses on modelling the dynamic behaviour of mechanical systems, including their modal properties, excitation and damping characteristics, and the response of multi-degree-of-freedom (MDOF) systems. The subsequent part addresses limit state assessment, cyclic loading, fatigue damage, the fundamentals of fracture mechanics, and methods for estimating the fatigue life and service life of mechanical components.
The final part introduces a probabilistic approach to reliability assessment based on fundamental concepts of probability theory and mathematical statistics. It covers the characterisation of uncertainties associated with loading, material properties, and physical models, the formulation of limit state functions, and the determination of failure probability.
Language of instruction
Czech
Number of ECTS credits
4
Supervisor
Department
Learning outcomes of the course unit
The students will understand the basics of the finite-element method with the emphasis placed on applications. Students will be able to provide stuctural analysis using finite element method.
Prerequisites
The knowledge from the courses of mechanics of solids, mathematics, numerical methods, machine design and CAD systems are assumed.
Entry knowledge
- Knowledge of mechanics, dynamics, strength of materials, CAD modelling and material sciences at the level of bachelor's study of mechanical engineering.
Planned learning activities and teaching methods
Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations.
Assesment methods and criteria linked to learning outcomes
Graded course-unit credit requirements: active participation in seminars, semestral project elaboration, passing the test based on finite element method theory, answering of tutor questions
Rules for evaluation and completion of the course
Course credit is awarded on the following conditions:
- active taking part in the lectures (max. 10 points),
- solving of assigned tasks and presentation of results (max. 30 points),
- at least it is necessary to get 20 points.
Exam is awarded on the following conditions:
- practical part: methodically correct solution of assigned task (max. 40 points),
- oral exam (max. 20 points),
- together one can obtain up to 100 points, final grade is determined in accordance with ECTS grading scale.
Lectures: attendance is recommended.
Seminars: attendance is obligatory and checked by the lecturer. Two absences are allowed. In case of longer absence, compensation of missed lessons depends on the instructions of course supervisor.
Aims
After completion of the course, students will be able to:
Formulate and justify physical models of real-world mechanical systems based on the fundamental laws of continuum mechanics.
Select an appropriate level of model fidelity, considering the purpose of the analysis, available information, underlying assumptions, and modelling uncertainties.
Determine and interpret the mechanical response of simple continuum systems and multi-degree-of-freedom (MDOF) dynamic systems.
Identify relevant limit states and assess failure mechanisms of mechanical components subjected to static and cyclic loading.
Estimate the fatigue life and remaining service life of selected mechanical components using appropriately chosen damage models.
Apply probabilistic approaches to assess uncertainties, failure probabilities, and the reliability of mechanical components.
Critically evaluate and justify modelling results, including their physical interpretation, validity, and limitations.
Specification of controlled education, way of implementation and compensation for absences
Participation in lectures is recommended, participation at seminars is checked and recorded. Two absences are allowed.
The study programmes with the given course
Programme N-KSI-P: Mechanical Engineering Design, Master's, compulsory
Type of course unit
Lecture
16 hours, optionally
Syllabus
- Introduction to the course, physical modelling of mechanical systems and continuum mechanics equations. Conservation laws, model idealisation, and the transition from a real-world system to a physical model.
- Constitutive equations and modelling of material behaviour. The role of constitutive relations in describing the relationships between stress, strain, strain rate, and loading history.
- Mechanical response, stress, strain, and limit states. Linking physical models to the assessment of mechanical response and the evaluation of limit state attainment.
- Dynamic modelling of mechanical systems. General equations of motion, degrees of freedom, multi-degree-of-freedom (MDOF) systems, and inertial, elastic, and dissipative effects.
- Modal properties, damping, and dynamic response. Resonance, frequency response, amplitude and phase characteristics, and the relationship between dynamic response, dynamic stresses, and potential damage initiation.
- Cyclic loading, fatigue, and remaining service life. Linking operational loading and mechanical response to damage accumulation and the estimation of remaining service life.
- Uncertainties and probabilistic description of mechanical systems. Deterministic and probabilistic approaches, uncertainties in material properties, geometry, loading, and boundary conditions.
- Probabilistic assessment of limit states and reliability. Formulation of limit state functions, probability of failure, reliability index, comparison of deterministic assessment based on factors of safety with probabilistic reliability assessment, and interpretation of reliability in engineering decision-making.
Computer-assisted exercise
32 hours, compulsory
Syllabus
Formulation of a physical model of a mechanical system. Idealisation of a real-world mechanical component, identification of governing physical phenomena, formulation of equations of equilibrium and motion, and selection of boundary and initial conditions. Practical application to a selected 1D or 2D problem.
Constitutive modelling of material behaviour. Application of linear elastic, elastoplastic, and viscoelastic material models, evaluation of stress–strain diagrams, identification of material parameters, and comparison of mechanical responses predicted by different material models.
Assessment of mechanical response and limit states. Determination of stresses and strains in a selected mechanical component, application of strength criteria, and assessment of stress concentrations and structural stability. Comparison of modelling assumptions and their influence on limit state assessment.
Formulation and solution of a dynamic model of a mechanical system. Derivation of equations of motion for a multi-degree-of-freedom (MDOF) system, determination of mass, stiffness, and damping matrices, formulation of initial conditions, and assessment of the influence of model parameters on dynamic behaviour.
Modal analysis and dynamic response of mechanical systems. Determination of natural frequencies and mode shapes of an MDOF system, evaluation of the response to harmonic excitation, analysis of resonance, and assessment of the influence of damping on amplitude and frequency response characteristics.
Fatigue damage and estimation of remaining service life. Evaluation of loading cycles, fatigue life prediction using S–N curves, application of cumulative damage rules and fundamental fracture mechanics relationships. Estimation of the remaining service life of a selected mechanical component.
Probabilistic modelling of mechanical systems. Statistical evaluation of material properties and loading, selection of probability distributions, determination of basic statistical characteristics, and assessment of uncertainty propagation from input parameters to mechanical response.
Probabilistic reliability assessment of mechanical components. Formulation of a limit state function, determination of failure probability and reliability index, assessment of the influence of input parameter uncertainties, and comparison of probabilistic approaches with deterministic assessments based on factors of safety.